Jerome Brunet <jbrunet@xxxxxxxxxxxx> writes: > Remove useless clock rate defines. These should not be defined but To be more precise, they're also unused, so maybe s/useless/unused/ ? > equested from the clock framework. s/equested/requested/ > Also correct typo on the DELAY register > > Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Otherwise, Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx> > --- > drivers/mmc/host/meson-gx-mmc.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index d480a8052a06..8a74a048db88 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -45,9 +45,7 @@ > #define CLK_DIV_MAX 63 > #define CLK_SRC_MASK GENMASK(7, 6) > #define CLK_SRC_XTAL 0 /* external crystal */ > -#define CLK_SRC_XTAL_RATE 24000000 > #define CLK_SRC_PLL 1 /* FCLK_DIV2 */ > -#define CLK_SRC_PLL_RATE 1000000000 > #define CLK_CORE_PHASE_MASK GENMASK(9, 8) > #define CLK_TX_PHASE_MASK GENMASK(11, 10) > #define CLK_RX_PHASE_MASK GENMASK(13, 12) > @@ -57,7 +55,7 @@ > #define CLK_PHASE_270 3 > #define CLK_ALWAYS_ON BIT(24) > > -#define SD_EMMC_DElAY 0x4 > +#define SD_EMMC_DELAY 0x4 > #define SD_EMMC_ADJUST 0x8 > #define SD_EMMC_CALOUT 0x10 > #define SD_EMMC_START 0x40 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
