On 21 July 2017 at 11:49, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
> Add CQE host operations, capabilities, and host members.
I think adding these new interfaces deserves a bit more descriptive changelog.
>
> Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> include/linux/mmc/host.h | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index ebd1cebbef0c..4dd7ada9b4b9 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -162,6 +162,19 @@ struct mmc_host_ops {
> unsigned int direction, int blk_size);
> };
>
> +struct mmc_cqe_ops {
Could you please add a small comment to each new callback. Even if the
names gives a good hint on they are used, some additional information
would be nice.
> + int (*cqe_enable)(struct mmc_host *host, struct mmc_card *card);
> + void (*cqe_disable)(struct mmc_host *host);
> + int (*cqe_request)(struct mmc_host *host, struct mmc_request *mrq);
> + void (*cqe_post_req)(struct mmc_host *host, struct mmc_request *mrq);
> + void (*cqe_off)(struct mmc_host *host);
What differs between ->cqe_off() and ->cqe_disable()? Do we need both?
> + int (*cqe_wait_for_idle)(struct mmc_host *host);
The name sounds like you will poll the host to understand when the
card becomes idle.
Is that so? Then when is this needed?
> + bool (*cqe_timeout)(struct mmc_host *host, struct mmc_request *mrq,
> + bool *recovery_needed);
> + void (*cqe_recovery_start)(struct mmc_host *host);
> + void (*cqe_recovery_finish)(struct mmc_host *host);
> +};
> +
> struct mmc_async_req {
> /* active mmc request */
> struct mmc_request *mrq;
> @@ -307,6 +320,8 @@ struct mmc_host {
> #define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */
> #define MMC_CAP2_NO_SD (1 << 21) /* Do not send SD commands during initialization */
> #define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */
> +#define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */
> +#define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */
>
> mmc_pm_flag_t pm_caps; /* supported pm features */
>
> @@ -393,6 +408,15 @@ struct mmc_host {
> int dsr_req; /* DSR value is valid */
> u32 dsr; /* optional driver stage (DSR) value */
>
> + /* Command Queue Engine (CQE) support */
> + const struct mmc_cqe_ops *cqe_ops;
> + void *cqe_private;
> + void (*cqe_recovery_notifier)(struct mmc_host *,
> + struct mmc_request *);
Please add a comment here to understand how this callback is going to be used.
> + int cqe_qdepth;
> + bool cqe_enabled;
> + bool cqe_on;
> +
> unsigned long private[0] ____cacheline_aligned;
> };
>
> --
> 1.9.1
>
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
