Hi,all Sorry to bother you, could you spare some time to help review patch v6 that I sended. Would you please give us your opinion? Thnak you very much. -----邮件原件----- 发件人: liwei (CM) 发送时间: 2017年7月6日 15:03 收件人: 'Guodong Xu'; Jaehoon Chung 抄送: Ulf Hansson; adrian.hunter@xxxxxxxxx; Shawn Lin; wsa+renesas@xxxxxxxxxxxxxxxxxxxx; hkallweit1@xxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx 主题: 答复: [PATCH v5] mmc: dw_mmc-k3: add sd support for hi3660 Hi, Jaehoon Thank you for your advice during your busy schedule, 1."Need the patch for adding "hi3660-dw-mshc" compatible Documentation/devicetree/bindings/k3-dw-mshc.txt" This "hi3660-dw-mshc" compatible string has been integrated into platform maintainer's tree together with dts changes. It's now in linux-next [1]；need this one more? 2. And added the minor comments. Iwill fix them in patch v6. Thank you very much. -----邮件原件----- 发件人: Guodong Xu [mailto:guodong.xu@xxxxxxxxxx] 发送时间: 2017年7月6日 14:45 收件人: Jaehoon Chung; liwei (CM) 抄送: Ulf Hansson; adrian.hunter@xxxxxxxxx; Shawn Lin; wsa+renesas@xxxxxxxxxxxxxxxxxxxx; hkallweit1@xxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx 主题: Re: [PATCH v5] mmc: dw_mmc-k3: add sd support for hi3660 On Thu, Jul 6, 2017 at 1:13 PM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote: > Hi, > > To Guodong, if you can forward this to Li Wei, plz do it. Sorry. > Sure. Put Li Wei in cc. And add my response. > On 07/03/2017 10:06 AM, liwei wrote: >> >> Add sd card support for hi3660 soc > > Need the patch for adding "hi3660-dw-mshc" compatible > Documentation/devicetree/bindings/k3-dw-mshc.txt > > And added the minor comments. > Hi, Jaehoo, This "hi3660-dw-mshc" compatible string has been integrated into platform maintainer's tree together with dts changes. It's now in linux-next [1], and in Linus' master branch [2], will be in mainline v4.13-rc's. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/log/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt?h=next-20170706 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt -Guodong >> >> Major changes in v3: >> - solve review comments from Heiner Kallweit. >> *use the GENMASK and FIELD_PREP macros replace the bit shift operation. >> *use usleep_range() replace udelay() and mdelay(). >> >> Major changes in v4: >> - solve review comments from Jaehoon Chung. >> *move common register for dwmmc controller to dwmmc header file. >> *modify definitions type of some register variables. >> *get rid of the magic numbers. >> >> Major changes in v5: >> - further improve coding style. >> --- >> drivers/mmc/host/dw_mmc-k3.c | 315 +++++++++++++++++++++++++++++++++++++++++++ >> drivers/mmc/host/dw_mmc.h | 2 + >> 2 files changed, 317 insertions(+) >> >> diff --git a/drivers/mmc/host/dw_mmc-k3.c >> b/drivers/mmc/host/dw_mmc-k3.c index e38fb0020bb1..a28eb8c7da82 >> 100644 >> --- a/drivers/mmc/host/dw_mmc-k3.c >> +++ b/drivers/mmc/host/dw_mmc-k3.c >> @@ -8,6 +8,8 @@ >> * (at your option) any later version. >> */ >> >> +#include <linux/bitops.h> >> +#include <linux/bitfield.h> >> #include <linux/clk.h> >> #include <linux/mfd/syscon.h> >> #include <linux/mmc/host.h> >> @@ -28,7 +30,38 @@ >> #define AO_SCTRL_SEL18 BIT(10) >> #define AO_SCTRL_CTRL3 0x40C >> >> +#define DWMMC_SDIO_ID 2 >> + >> +#define SOC_SCTRL_SCPERCTRL5 (0x314) >> +#define SDCARD_IO_SEL18 BIT(2) >> + >> +#define SDCARD_RD_THRESHOLD (512) >> + >> +#define GENCLK_DIV (7) >> + >> +#define GPIO_CLK_ENABLE BIT(16) >> +#define GPIO_CLK_DIV_MASK GENMASK(11, 8) >> +#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13) >> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16) >> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21) >> +#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26) >> + >> +#define TIMING_MODE 3 >> +#define TIMING_CFG_NUM 10 >> + >> +#define PULL_DOWN BIT(1) >> +#define PULL_UP BIT(0) >> + >> +#define NUM_PHASES (40) >> + >> +#define ENABLE_SHIFT_MIN_SMPL (4) >> +#define ENABLE_SHIFT_MAX_SMPL (12) >> +#define USE_DLY_MIN_SMPL (11) >> +#define USE_DLY_MAX_SMPL (14) >> + >> struct k3_priv { >> + int ctrl_id; >> + u32 cur_speed; >> struct regmap *reg; >> }; >> >> @@ -38,6 +71,41 @@ static unsigned long dw_mci_hi6220_caps[] = { >> 0 >> }; >> >> +struct hs_timing { >> + u32 drv_phase; >> + u32 smpl_dly; >> + u32 smpl_phase_max; >> + u32 smpl_phase_min; >> +}; >> + >> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = { >> + { /* reserved */ }, >> + { /* SD */ >> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */ >> + {6, 0, 4, 4,}, /* 1: MMC_HS */ >> + {6, 0, 3, 3,}, /* 2: SD_HS */ >> + {6, 0, 15, 15,}, /* 3: SDR12 */ >> + {6, 0, 2, 2,}, /* 4: SDR25 */ >> + {4, 0, 11, 0,}, /* 5: SDR50 */ >> + {6, 4, 15, 0,}, /* 6: SDR104 */ >> + {0}, /* 7: DDR50 */ >> + {0}, /* 8: DDR52 */ >> + {0}, /* 9: HS200 */ >> + }, >> + { /* SDIO */ >> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */ >> + {0}, /* 1: MMC_HS */ >> + {6, 0, 15, 15,}, /* 2: SD_HS */ >> + {6, 0, 15, 15,}, /* 3: SDR12 */ >> + {6, 0, 0, 0,}, /* 4: SDR25 */ >> + {4, 0, 12, 0,}, /* 5: SDR50 */ >> + {5, 4, 15, 0,}, /* 6: SDR104 */ >> + {0}, /* 7: DDR50 */ >> + {0}, /* 8: DDR52 */ >> + {0}, /* 9: HS200 */ >> + } >> +}; >> + >> static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios >> *ios) { >> int ret; >> @@ -66,6 +134,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host) >> if (IS_ERR(priv->reg)) >> priv->reg = NULL; >> >> + priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); >> + if (priv->ctrl_id < 0) >> + priv->ctrl_id = 0; >> + >> host->priv = priv; >> return 0; >> } >> @@ -144,7 +216,245 @@ static const struct dw_mci_drv_data hi6220_data = { >> .execute_tuning = dw_mci_hi6220_execute_tuning, >> }; >> >> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, >> + int smpl_phase) { >> + u32 drv_phase; >> + u32 smpl_dly; >> + u32 use_smpl_dly = 0; >> + u32 enable_shift = 0; >> + u32 reg_value; >> + int ctrl_id; >> + struct k3_priv *priv; >> + >> + priv = host->priv; >> + ctrl_id = priv->ctrl_id; >> + >> + drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase; >> + smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly; >> + if (smpl_phase == -1) >> + smpl_phase = >> + (hs_timing_cfg[ctrl_id][timing].smpl_phase_max + >> + >> + hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2; >> + >> + switch (timing) { >> + case MMC_TIMING_UHS_SDR104: >> + if (smpl_phase >= USE_DLY_MIN_SMPL && >> + smpl_phase <= USE_DLY_MAX_SMPL) >> + use_smpl_dly = 1; >> + /* fallthrough */ >> + case MMC_TIMING_UHS_SDR50: >> + if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL && >> + smpl_phase <= ENABLE_SHIFT_MAX_SMPL) >> + enable_shift = 1; >> + break; >> + } >> + >> + mci_writel(host, GPIO, 0x0); >> + usleep_range(5, 10); >> + >> + reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) | >> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) | >> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase); >> + mci_writel(host, UHS_REG_EXT, reg_value); >> + >> + mci_writel(host, ENABLE_SHIFT, enable_shift); >> + >> + reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) | >> + FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly); >> + mci_writel(host, GPIO, (unsigned int)reg_value | >> + GPIO_CLK_ENABLE); >> + >> + /* We should delay 1ms wait for timing setting finished. */ >> + usleep_range(1000, 2000); >> +} >> + >> +static int dw_mci_hi3660_init(struct dw_mci *host) { >> + mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD, >> + SDMMC_CARD_RD_THR_EN)); >> + >> + dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1); >> + host->bus_hz /= (GENCLK_DIV + 1); >> + >> + return 0; >> +} >> + >> +static int dw_mci_set_sel18(struct dw_mci *host, bool set) { >> + int ret; >> + unsigned int val; >> + struct k3_priv *priv; >> + >> + priv = host->priv; >> + >> + val = set ? SDCARD_IO_SEL18 : 0; >> + ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5, >> + SDCARD_IO_SEL18, val); >> + if (ret) { >> + dev_err(host->dev, "sel18 %u error\n", val); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios) > > static? > >> +{ >> + int ret; >> + unsigned long wanted; >> + unsigned long actual; >> + struct k3_priv *priv = host->priv; >> + >> + if (!ios->clock || ios->clock == priv->cur_speed) >> + return; >> + >> + wanted = ios->clock * (GENCLK_DIV + 1); >> + ret = clk_set_rate(host->ciu_clk, wanted); >> + if (ret) { >> + dev_err(host->dev, "failed to set rate %luHz\n", wanted); >> + return; >> + } >> + actual = clk_get_rate(host->ciu_clk); >> + >> + dw_mci_hs_set_timing(host, ios->timing, -1); >> + host->bus_hz = actual / (GENCLK_DIV + 1); >> + host->current_speed = 0; >> + priv->cur_speed = host->bus_hz; } >> + >> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag) { >> + int i; >> + int interval; >> + unsigned int v; >> + unsigned int len; >> + unsigned int range_start = 0; >> + unsigned int range_length = 0; >> + unsigned int middle_range = 0; >> + >> + if (!sample_flag) >> + return -EIO; >> + >> + if (~sample_flag == 0) >> + return 0; >> + >> + i = ffs(sample_flag) - 1; >> + >> + /*A clock cycle is divided into 32 phases, >> + *each of which is represented by a bit, >> + *finding the optimal phase. >> + */ > > Fix the comment style. > >> + while (i < 32) { >> + v = ror32(sample_flag, i); >> + len = ffs(~v) - 1; >> + >> + if (len > range_length) { >> + range_length = len; >> + range_start = i; >> + } >> + >> + interval = ffs(v >> len) - 1; >> + if (interval < 0) >> + break; >> + >> + i += len + interval; >> + } >> + >> + middle_range = range_start + range_length / 2; >> + if (middle_range >= 32) >> + middle_range %= 32; >> + >> + return middle_range; >> +} >> + >> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, >> +u32 opcode) { >> + int i = 0; >> + struct dw_mci *host = slot->host; >> + struct mmc_host *mmc = slot->mmc; >> + int smpl_phase = 0; >> + u32 tuning_sample_flag = 0; >> + int best_clksmpl = 0; >> + >> + for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) { >> + smpl_phase %= 32; >> + >> + mci_writel(host, TMOUT, ~0); >> + dw_mci_hs_set_timing(host, mmc->ios.timing, >> + smpl_phase); >> + >> + if (!mmc_send_tuning(mmc, opcode, NULL)) >> + tuning_sample_flag |= (1 << smpl_phase); >> + else >> + tuning_sample_flag &= ~(1 << smpl_phase); >> + } >> + >> + best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag); >> + if (best_clksmpl < 0) { >> + dev_err(host->dev, "All phases bad!\n"); >> + return -EIO; >> + } >> + >> + dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl); >> + >> + dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n", >> + best_clksmpl, tuning_sample_flag); >> + return 0; >> +} >> + >> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc, >> + struct mmc_ios *ios) { >> + int ret; >> + int min_uv = 0; >> + int max_uv = 0; >> + struct dw_mci_slot *slot = mmc_priv(mmc); >> + struct k3_priv *priv; >> + struct dw_mci *host; >> + >> + host = slot->host; >> + priv = host->priv; >> + >> + if (!priv || !priv->reg) >> + return 0; >> + >> + if (priv->ctrl_id == DWMMC_SDIO_ID) >> + return 0; >> + >> + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { >> + ret = dw_mci_set_sel18(host, 0); >> + if (ret) >> + return ret; >> + min_uv = 2950000; >> + max_uv = 2950000; >> + } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { >> + ret = dw_mci_set_sel18(host, 1); >> + if (ret) >> + return ret; >> + min_uv = 1800000; >> + max_uv = 1800000; >> + } >> + >> + if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) >> + return 0; >> + >> + ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv); >> + if (ret) { >> + dev_err(host->dev, "Regulator set error %d: %d - %d\n", >> + ret, min_uv, max_uv); >> + return ret; >> + } >> + return 0; >> +} >> + >> +static const struct dw_mci_drv_data hi3660_data = { >> + .init = dw_mci_hi3660_init, >> + .set_ios = dw_mci_hi3660_set_ios, >> + .parse_dt = dw_mci_hi6220_parse_dt, >> + .execute_tuning = dw_mci_hi3660_execute_tuning, >> + .switch_voltage = dw_mci_hi3660_switch_voltage, }; >> + >> static const struct of_device_id dw_mci_k3_match[] = { >> + { .compatible = "hisilicon,hi3660-dw-mshc", .data = >> + &hi3660_data, }, >> { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, >> { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, }, >> {}, >> @@ -155,6 +465,11 @@ static int dw_mci_k3_probe(struct >> platform_device *pdev) { >> const struct dw_mci_drv_data *drv_data; >> const struct of_device_id *match; >> + struct reset_control *rst; >> + >> + rst = devm_reset_control_get(&pdev->dev, NULL); >> + if (!IS_ERR(rst)) >> + reset_control_reset(rst); >> >> match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); >> drv_data = match->data; >> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h >> index ce347361f3dc..7cdcafda8eec 100644 >> --- a/drivers/mmc/host/dw_mmc.h >> +++ b/drivers/mmc/host/dw_mmc.h >> @@ -319,6 +319,8 @@ struct dw_mci_board { >> #define SDMMC_DSCADDR 0x094 >> #define SDMMC_BUFADDR 0x098 >> #define SDMMC_CDTHRCTL 0x100 >> +#define SDMMC_UHS_REG_EXT 0x108 >> +#define SDMMC_ENABLE_SHIFT 0x110 >> #define SDMMC_DATA(x) (x) >> /* >> * Registers to support idmac 64-bit address mode >> > ��.n��������+%������w��{.n�����{��i��)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
