On Mon, Jul 17, 2017 at 5:17 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> On Fri, Jul 14, 2017 at 02:42:56PM +0800, Chen-Yu Tsai wrote:
>> On the SoCs that introduced the new timing mode for MMC controllers,
>> both the old (where the clock delays are set in the CCU) and new
>> (where the clock delays are set in the MMC controller) timing modes
>> are available, and we have to support them both. However there are
>> two bits that control which mode is active. One is in the CCU, the
>> other is in the MMC controller. The settings on both sides must be
>> the same, or nothing will work.
>>
>> The CCU's get/set_phase callbacks return -ENOTSUPP when the new
>> timing mode is active. This provides a way to know which mode is
>> active on that side, and we can set the bit on the MMC controller
>> side accordingly.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>> ---
>> drivers/mmc/host/sunxi-mmc.c | 34 ++++++++++++++++++++++++++++++----
>> 1 file changed, 30 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
>> index 0fb4e4c119e1..56e45c65b52d 100644
>> --- a/drivers/mmc/host/sunxi-mmc.c
>> +++ b/drivers/mmc/host/sunxi-mmc.c
>> @@ -22,6 +22,7 @@
>> #include <linux/err.h>
>>
>> #include <linux/clk.h>
>> +#include <linux/clk/sunxi-ng.h>
>> #include <linux/gpio.h>
>> #include <linux/platform_device.h>
>> #include <linux/spinlock.h>
>> @@ -259,7 +260,7 @@ struct sunxi_mmc_cfg {
>> /* Does DATA0 needs to be masked while the clock is updated */
>> bool mask_data0;
>>
>> - bool needs_new_timings;
>> + bool has_new_timings;
>
> I think we should have both, it's a bit different. Newer SoCs like the
> A64 can only operate using new timings, while the older ones can
> operate in both modes.
>
> In one case, we're forced to use it, in the other one it's a
> policy. We should differentiate both cases.
For the A64's case, the limit is implied by not having any clk_delays.
But yes, I'll keep "needs_new_timings", and rename the new option to
"has_timing_switch" to make things clearer.
ChenYu
>
> Looks good otherwise, thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
