> The RPMB partition on the eMMC devices is a special area used
> for storing cryptographically safe information signed by a
> special secret key. To write and read records from this special
> area, authentication is needed.
>
> The RPMB area is *only* and *exclusively* accessed using
> ioctl():s from userspace. It is not really a block device,
> as blocks cannot be read or written from the device, also
> the signed chunks that can be stored on the RPMB are actually
> 256 bytes, not 512 making a block device a real bad fit.
>
> Currently the RPMB partition spawns a separate block device
> named /dev/mmcblkNrpmb for each device with an RPMB partition,
> including the creation of a block queue with its own kernel
> thread and all overhead associated with this. On the Ux500
> HREFv60 platform, for example, the two eMMCs means that two
> block queues with separate threads are created for no use
> whatsoever.
>
> I have concluded that this block device design for RPMB is
> actually pretty wrong.
That's correct, I guess someone didn't read the spec till the end when
adding rpmb block device.
though also looks like that the software guys where drinking up in the
bar while jdec committee has met.
The RPMB area should have been designed
> to be accessed from /dev/mmcblkN directly, using ioctl()s on
> the main block device. It is however way too late to change
> that, since userspace expects to open an RPMB device in
> /dev/mmcblkNrpmb and we cannot break userspace.
Unfortunately, this is currently necessary,
> This patch tries to amend the situation using the following
> strategy:
>
> - Stop creating a block device for the RPMB partition/area
>
> - Instead create a custom, dynamic character device with
> the same name.
>
> - Make this new character device support exactly the same
> set of ioctl()s as the old block device.
>
> - Wrap the requests back to the same ioctl() handlers, but
> issue them on the block queue of the main partition/area,
> i.e. /dev/mmcblkN
>
> We need to create a special "rpmb" bus type in order to get
> udev and/or busybox hot/coldplug to instantiate the device
> node properly.
>
> Before the patch, this appears in 'ps aux':
>
> 101 root 0:00 [mmcqd/2rpmb]
> 123 root 0:00 [mmcqd/3rpmb]
>
> After applying the patch these surplus block queue threads
> are gone, but RPMB is as usable as ever using the userspace
> MMC tools, such as 'mmc rpmb read-counter'.
>
> We get instead those dynamice devices in /dev:
>
> brw-rw---- 1 root root 179, 0 Jan 1 2000 mmcblk0
> brw-rw---- 1 root root 179, 1 Jan 1 2000 mmcblk0p1
> brw-rw---- 1 root root 179, 2 Jan 1 2000 mmcblk0p2
> brw-rw---- 1 root root 179, 5 Jan 1 2000 mmcblk0p5
> brw-rw---- 1 root root 179, 8 Jan 1 2000 mmcblk2
> brw-rw---- 1 root root 179, 16 Jan 1 2000 mmcblk2boot0
> brw-rw---- 1 root root 179, 24 Jan 1 2000 mmcblk2boot1
> crw-rw---- 1 root root 248, 0 Jan 1 2000 mmcblk2rpmb
> brw-rw---- 1 root root 179, 32 Jan 1 2000 mmcblk3
> brw-rw---- 1 root root 179, 40 Jan 1 2000 mmcblk3boot0
> brw-rw---- 1 root root 179, 48 Jan 1 2000 mmcblk3boot1
> brw-rw---- 1 root root 179, 33 Jan 1 2000 mmcblk3p1
> crw-rw---- 1 root root 248, 1 Jan 1 2000 mmcblk3rpmb
>
> Notice the (248,0) and (248,1) character devices for RPMB.
>
> Tomas Winkler <tomas.winkler@xxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> Some discussion points:
>
> I am aware of Tomas Winklers attempts to make RPMB handling into
> its own subsystem. I have no such ambitions whatsoever, I am only
> trying to sensibly accomodate what we already have and handle
> our RPMB in a way that is not littering the place with weirdo
> block devices.
My effort is a bit different, one is to provide an abstraction over all storage
devices that provides RPMB (emmc, ufs, NVMe) and second, provide in-kernel API,
still it's possible to create a filesystem over RPMB in case you own the key.
Though not ideal, these two things should live in parallel for now somehow.
>
> The patch is a lot of "that should have been done differently from
> the outset" and "it is not a perfect solution", I'd appreciate if
> you take a look at the kernel before and after this patch and
> think of it as a path forward, are things better or worse like
> this, thinking toward the future.
>
> I guess it would be nicer if I could (from the KERNEL) create a
> symlink from mmcblk2rpmb -> mmcblk2 or a second mknod creating
> mmcblk2rpmb with the same major/minor numbers as the main device.
> I guess that can be done with udev scripts, but that breaks all
> setups with old udev scripts, busybox, Android etc. So creating
> a proper device seems necessary to satisfy userspace.
>
> I haven't been able to do much testing as my RPMB-capable device
> seems to be failing to do anything sensible, but I atleast get
> the same error codes from "mmc rpmb read-counter /deb/mmcblkNrpmb"
> before/after the patch.
Hop
> ---
> drivers/mmc/core/block.c | 278 +++++++++++++++++++++++++++++++++++++++++++----
> drivers/mmc/core/queue.h | 2 +
> 2 files changed, 256 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index b8c71fdb6ed4..0a226bc23429 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -28,6 +28,7 @@
> #include <linux/hdreg.h>
> #include <linux/kdev_t.h>
> #include <linux/blkdev.h>
> +#include <linux/cdev.h>
> #include <linux/mutex.h>
> #include <linux/scatterlist.h>
> #include <linux/string_helpers.h>
> @@ -86,6 +87,7 @@ static int max_devices;
> #define MAX_DEVICES 256
>
> static DEFINE_IDA(mmc_blk_ida);
> +static DEFINE_IDA(mmc_rpmb_ida);
>
> /*
> * There is one mmc_blk_data per slot.
> @@ -96,6 +98,7 @@ struct mmc_blk_data {
> struct gendisk *disk;
> struct mmc_queue queue;
> struct list_head part;
> + struct list_head rpmbs;
>
> unsigned int flags;
> #define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */
> @@ -121,6 +124,30 @@ struct mmc_blk_data {
> int area_type;
> };
>
> +/* Device type for RPMB character devices */
> +static dev_t rpmb_devt;
This is mmc_rpmb device not 'rpmb' as there are other storage devices
that provide RPMB partition.
> +
> +/* Bus type for RPMB character devices */
> +static struct bus_type rpmb_bus_type = {
> + .name = "rpmb",
> +};
Same here, mmc_rpmb_... , and other place bellow.
> +
> +/**
> + * struct mmc_rpmb_data - special RPMB device type for these areas
> + * @dev: the device for the RPMB area
> + * @chrdev: character device for the RPMB area
> + * @id: unique device ID number
> + * @md: parent MMC block device
> + * @node: list item, so we can put this device on a list
> + */
> +struct mmc_rpmb_data {
> + struct device dev;
> + struct cdev chrdev;
> + int id;
would keep also partition access bit needed for the partition switching.
> + struct mmc_blk_data *md;
> + struct list_head node;
> +};
> +
> static DEFINE_MUTEX(open_lock);
>
> module_param(perdev_minors, int, 0444);
> @@ -432,21 +459,29 @@ static int ioctl_do_sanitize(struct mmc_card *card)
> }
>
> static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
> - struct mmc_blk_ioc_data *idata)
> + struct mmc_blk_ioc_data *idata, bool rpmb_ioctl)
Don't remember now if this is for eMMC but in future there might be
more then one RPMB partition on the device
and boolean will not work here. rather use target_part, tho bits are
exhausted there too.
> {
> struct mmc_command cmd = {};
> struct mmc_data data = {};
> struct mmc_request mrq = {};
> struct scatterlist sg;
> int err;
> - bool is_rpmb = false;
> + unsigned int target_part;
should come as a function input.
> u32 status = 0;
>
> if (!card || !md || !idata)
> return -EINVAL;
>
> - if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
> - is_rpmb = true;
> + /*
> + * The RPMB accesses comes in from the character device, so we
> + * need to target these explicitly. Else we just target the
> + * partition type for the block device the ioctl() was issued
> + * on.
> + */
> + if (rpmb_ioctl)
> + target_part = EXT_CSD_PART_CONFIG_ACC_RPMB;
> + else
> + target_part = md->part_type;
>
> cmd.opcode = idata->ic.opcode;
> cmd.arg = idata->ic.arg;
> @@ -490,7 +525,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>
> mrq.cmd = &cmd;
>
> - err = mmc_blk_part_switch(card, md->part_type);
> + err = mmc_blk_part_switch(card, target_part);
> if (err)
> return err;
>
> @@ -500,7 +535,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
> return err;
> }
>
> - if (is_rpmb) {
> + if (rpmb_ioctl) {
> err = mmc_set_blockcount(card, data.blocks,
> idata->ic.write_flag & (1 << 31));
> if (err)
> @@ -540,7 +575,7 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>
> memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
>
> - if (is_rpmb) {
> + if (rpmb_ioctl) {
> /*
> * Ensure RPMB command has completed by polling CMD13
> * "Send Status".
> @@ -556,7 +591,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
> }
>
> static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
> - struct mmc_ioc_cmd __user *ic_ptr)
> + struct mmc_ioc_cmd __user *ic_ptr,
> + bool rpmb_ioctl)
> {
> struct mmc_blk_ioc_data *idata;
> struct mmc_blk_ioc_data *idatas[1];
> @@ -583,7 +619,10 @@ static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
> idata->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
> __GFP_RECLAIM);
> idatas[0] = idata;
> - req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL;
> + if (rpmb_ioctl)
> + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL_RPMB;
> + else
> + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL;
> req_to_mmc_queue_req(req)->drv_op_data = idatas;
> req_to_mmc_queue_req(req)->ioc_count = 1;
> blk_execute_rq(mq->queue, NULL, req, 0);
> @@ -598,7 +637,8 @@ static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
> }
>
> static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md,
> - struct mmc_ioc_multi_cmd __user *user)
> + struct mmc_ioc_multi_cmd __user *user,
> + bool rpmb_ioctl)
> {
> struct mmc_blk_ioc_data **idata = NULL;
> struct mmc_ioc_cmd __user *cmds = user->cmds;
> @@ -642,7 +682,10 @@ static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md,
> req = blk_get_request(mq->queue,
> idata[0]->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
> __GFP_RECLAIM);
> - req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL;
> + if (rpmb_ioctl)
> + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL_RPMB;
> + else
> + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_IOCTL;
> req_to_mmc_queue_req(req)->drv_op_data = idata;
> req_to_mmc_queue_req(req)->ioc_count = num_of_cmds;
> blk_execute_rq(mq->queue, NULL, req, 0);
> @@ -690,7 +733,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
> if (!md)
> return -EINVAL;
> ret = mmc_blk_ioctl_cmd(md,
> - (struct mmc_ioc_cmd __user *)arg);
> + (struct mmc_ioc_cmd __user *)arg,
> + false);
> mmc_blk_put(md);
> return ret;
> case MMC_IOC_MULTI_CMD:
> @@ -701,7 +745,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
> if (!md)
> return -EINVAL;
> ret = mmc_blk_ioctl_multi_cmd(md,
> - (struct mmc_ioc_multi_cmd __user *)arg);
> + (struct mmc_ioc_multi_cmd __user *)arg,
> + false);
> mmc_blk_put(md);
> return ret;
> default:
> @@ -1173,26 +1218,29 @@ static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req)
> struct mmc_queue_req *mq_rq;
> struct mmc_card *card = mq->card;
> struct mmc_blk_data *md = mq->blkdata;
> - struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
> struct mmc_blk_ioc_data **idata;
> + bool rpmb_ioctl;
> u8 **ext_csd;
> u32 status;
> int ret;
> int i;
>
> mq_rq = req_to_mmc_queue_req(req);
> + rpmb_ioctl = (mq_rq->drv_op == MMC_DRV_OP_IOCTL_RPMB);
>
> switch (mq_rq->drv_op) {
> case MMC_DRV_OP_IOCTL:
> + case MMC_DRV_OP_IOCTL_RPMB:
> idata = mq_rq->drv_op_data;
> for (i = 0; i < mq_rq->ioc_count; i++) {
> - ret = __mmc_blk_ioctl_cmd(card, md, idata[i]);
> + ret = __mmc_blk_ioctl_cmd(card, md, idata[i],
> + rpmb_ioctl);
> if (ret)
> break;
> }
> /* Always switch back to main area after RPMB access */
> - if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
> - mmc_blk_part_switch(card, main_md->part_type);
> + if (rpmb_ioctl)
> + mmc_blk_part_switch(card, 0);
> break;
> case MMC_DRV_OP_BOOT_WP:
> ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,
> @@ -2006,6 +2054,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
>
> spin_lock_init(&md->lock);
> INIT_LIST_HEAD(&md->part);
> + INIT_LIST_HEAD(&md->rpmbs);
> md->usage = 1;
>
> ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
> @@ -2124,6 +2173,151 @@ static int mmc_blk_alloc_part(struct mmc_card *card,
> return 0;
> }
>
> +/**
> + * rpmb_ioctl() - ioctl handler for the RPMB chardev
> + * @filp: the character device file
> + * @cmd: the ioctl() command
> + * @arg: the argument from userspace
> + *
> + * This will essentially just redirect the ioctl()s coming in over to
> + * the main block device spawning the RPMB character device.
> + */
> +static long rpmb_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> +{
> + struct mmc_rpmb_data *rpmb = filp->private_data;
> + int ret;
> +
> + switch (cmd) {
> + case MMC_IOC_CMD:
> + ret = mmc_blk_ioctl_cmd(rpmb->md,
> + (struct mmc_ioc_cmd __user *)arg,
> + true);
> + break;
> + case MMC_IOC_MULTI_CMD:
> + ret = mmc_blk_ioctl_multi_cmd(rpmb->md,
> + (struct mmc_ioc_multi_cmd __user *)arg,
> + true);
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_COMPAT
> +static long rpmb_ioctl_compat(struct file *filp, unsigned int cmd,
> + unsigned long arg)
> +{
> + return rpmb_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
> +}
> +#endif
> +
> +static int rpmb_chrdev_open(struct inode *inode, struct file *filp)
> +{
> + struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev,
> + struct mmc_rpmb_data, chrdev);
> +
> + get_device(&rpmb->dev);
> + filp->private_data = rpmb;
> + mutex_lock(&open_lock);
> + rpmb->md->usage++;
> + mutex_unlock(&open_lock);
> +
> + return nonseekable_open(inode, filp);
> +}
> +
> +static int rpmb_chrdev_release(struct inode *inode, struct file *filp)
> +{
> + struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev,
> + struct mmc_rpmb_data, chrdev);
> +
> + put_device(&rpmb->dev);
> + mutex_lock(&open_lock);
> + rpmb->md->usage--;
> + mutex_unlock(&open_lock);
> +
> + return 0;
> +}
> +
> +static const struct file_operations rpmb_fileops = {
> + .release = rpmb_chrdev_release,
> + .open = rpmb_chrdev_open,
> + .owner = THIS_MODULE,
> + .llseek = no_llseek,
> + .unlocked_ioctl = rpmb_ioctl,
> +#ifdef CONFIG_COMPAT
> + .compat_ioctl = rpmb_ioctl_compat,
> +#endif
> +};
> +
> +
> +static int mmc_blk_alloc_rpmb_part(struct mmc_card *card,
> + struct mmc_blk_data *md,
> + sector_t size,
> + const char *subname)
> +{
> + int devidx, ret;
> + char rpmb_name[DISK_NAME_LEN];
> + char cap_str[10];
> + struct mmc_rpmb_data *rpmb;
> +
> + /* This creates the minor number for the RPMB char device */
> + devidx = ida_simple_get(&mmc_rpmb_ida, 0, max_devices, GFP_KERNEL);
> + if (devidx < 0)
> + return devidx;
> +
> + rpmb = kzalloc(sizeof(*rpmb), GFP_KERNEL);
> + if (!rpmb)
> + return -ENOMEM;
> +
> + snprintf(rpmb_name, sizeof(rpmb_name),
> + "mmcblk%u%s", card->host->index, subname ? subname : "");
> +
> + rpmb->id = devidx;
> + rpmb->dev.init_name = rpmb_name;
> + rpmb->dev.bus = &rpmb_bus_type;
> + rpmb->dev.devt = MKDEV(MAJOR(rpmb_devt), rpmb->id);
> + rpmb->dev.parent = &card->dev;
> + device_initialize(&rpmb->dev);
> + dev_set_drvdata(&rpmb->dev, rpmb);
> + rpmb->md = md;
> +
> + cdev_init(&rpmb->chrdev, &rpmb_fileops);
> + rpmb->chrdev.owner = THIS_MODULE;
> + ret = cdev_device_add(&rpmb->chrdev, &rpmb->dev);
> + if (ret) {
> + pr_err("%s: could not add character device\n", rpmb_name);
> + goto out_remove_ida;
> + }
> +
> + list_add(&rpmb->node, &md->rpmbs);
> +
> + string_get_size((u64)size, 512, STRING_UNITS_2,
> + cap_str, sizeof(cap_str));
> +
> + pr_info("%s: %s %s partition %u %s, chardev (%d:%d)\n",
> + rpmb_name, mmc_card_id(card),
> + mmc_card_name(card), EXT_CSD_PART_CONFIG_ACC_RPMB, cap_str,
> + MAJOR(rpmb_devt), rpmb->id);
> +
> + return 0;
> +
> +out_remove_ida:
> + ida_simple_remove(&mmc_rpmb_ida, rpmb->id);
> + kfree(rpmb);
> + return ret;
> +}
> +
> +static void mmc_blk_remove_rpmb_part(struct mmc_rpmb_data *rpmb)
> +{
> + cdev_device_del(&rpmb->chrdev, &rpmb->dev);
> + device_del(&rpmb->dev);
> + ida_simple_remove(&mmc_rpmb_ida, rpmb->id);
> + kfree(rpmb);
> +}
> +
> /* MMC Physical partitions consist of two boot partitions and
> * up to four general purpose partitions.
> * For each partition enabled in EXT_CSD a block device will be allocatedi
> @@ -2132,13 +2326,25 @@ static int mmc_blk_alloc_part(struct mmc_card *card,
>
> static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md)
> {
> - int idx, ret = 0;
> + int idx, ret;
>
> if (!mmc_card_mmc(card))
> return 0;
>
> for (idx = 0; idx < card->nr_parts; idx++) {
> - if (card->part[idx].size) {
> + if (card->part[idx].area_type & MMC_BLK_DATA_AREA_RPMB) {
> + /*
> + * RPMB partitions does not provide block access, they
> + * are only accessed using ioctl():s. Thus create
> + * special RPMB block devices that do not have a
> + * backing block queue for these.
> + */
> + ret = mmc_blk_alloc_rpmb_part(card, md,
> + card->part[idx].size >> 9,
> + card->part[idx].name);
Extract partition access bits form card->part[idx].part_cfg,
> + if (ret)
> + return ret;
> + } else if (card->part[idx].size) {
> ret = mmc_blk_alloc_part(card, md,
> card->part[idx].part_cfg,
> card->part[idx].size >> 9,
> @@ -2150,7 +2356,7 @@ static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md)
> }
> }
>
> - return ret;
> + return 0;
> }
>
> static void mmc_blk_remove_req(struct mmc_blk_data *md)
> @@ -2183,7 +2389,15 @@ static void mmc_blk_remove_parts(struct mmc_card *card,
> {
> struct list_head *pos, *q;
> struct mmc_blk_data *part_md;
> + struct mmc_rpmb_data *rpmb;
>
> + /* Remove RPMB partitions */
> + list_for_each_safe(pos, q, &md->rpmbs) {
list_for_each_entry_safe ?
> + rpmb = list_entry(pos, struct mmc_rpmb_data, node);
> + list_del(pos);
> + mmc_blk_remove_rpmb_part(rpmb);
> + }
> + /* Remove block partitions */
> list_for_each_safe(pos, q, &md->part) {
> part_md = list_entry(pos, struct mmc_blk_data, part);
> list_del(pos);
> @@ -2502,6 +2716,17 @@ static int __init mmc_blk_init(void)
> {
> int res;
>
> + res = bus_register(&rpmb_bus_type);
> + if (res < 0) {
> + pr_err("mmcblk: could not register RPMB bus type\n");
> + return res;
> + }
> + res = alloc_chrdev_region(&rpmb_devt, 0, MAX_DEVICES, "rpmb");
mmc_rpmb
> + if (res < 0) {
> + pr_err("mmcblk: failed to allocate rpmb chrdev region\n");
> + goto out_bus_unreg;
> + }
> +
> if (perdev_minors != CONFIG_MMC_BLOCK_MINORS)
> pr_info("mmcblk: using %d minors per device\n", perdev_minors);
>
> @@ -2509,16 +2734,20 @@ static int __init mmc_blk_init(void)
>
> res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
> if (res)
> - goto out;
> + goto out_chrdev_unreg;
>
> res = mmc_register_driver(&mmc_driver);
> if (res)
> - goto out2;
> + goto out_blkdev_unreg;
>
> return 0;
> - out2:
> +
> +out_blkdev_unreg:
> unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
> - out:
> +out_chrdev_unreg:
> + unregister_chrdev_region(rpmb_devt, MAX_DEVICES);
> +out_bus_unreg:
> + bus_unregister(&rpmb_bus_type);
> return res;
> }
>
> @@ -2526,6 +2755,7 @@ static void __exit mmc_blk_exit(void)
> {
> mmc_unregister_driver(&mmc_driver);
> unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
> + unregister_chrdev_region(rpmb_devt, MAX_DEVICES);
> }
>
> module_init(mmc_blk_init);
> diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h
> index 04fc89360a7a..a2b6a9fcab01 100644
> --- a/drivers/mmc/core/queue.h
> +++ b/drivers/mmc/core/queue.h
> @@ -35,12 +35,14 @@ struct mmc_blk_request {
> /**
> * enum mmc_drv_op - enumerates the operations in the mmc_queue_req
> * @MMC_DRV_OP_IOCTL: ioctl operation
> + * @MMC_DRV_OP_IOCTL_RPMB: RPMB-oriented ioctl operation
> * @MMC_DRV_OP_BOOT_WP: write protect boot partitions
> * @MMC_DRV_OP_GET_CARD_STATUS: get card status
> * @MMC_DRV_OP_GET_EXT_CSD: get the EXT CSD from an eMMC card
> */
> enum mmc_drv_op {
> MMC_DRV_OP_IOCTL,
> + MMC_DRV_OP_IOCTL_RPMB,
> MMC_DRV_OP_BOOT_WP,
> MMC_DRV_OP_GET_CARD_STATUS,
> MMC_DRV_OP_GET_EXT_CSD,
> --
> 2.9.4
Still need to try somehow combine mine patches above this
Thanks
Tomas
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
