Re: [RFC PATCH v2 0/2] mmc: core: process ECC errors raised in stop cmds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8 April 2017 at 22:20, Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> wrote:
> Here is the second RFC for handling ECC errors flagged in the stop command
> after a multiblock transfer. It is still RFC because I could only test it by
> inducing ECC errors in software (see patch for TMIO below). Shimoda-san, can
> you try this series with the SD tester again? That would be very kind.
>
> Other than that, I hope the patch descriptions and comments explain the single
> steps. Looking forward for thoughts.

Apologize for the delay!

I looked into these and the changes seems reasonable. I have applied
them for next to allow them to get some test coverage.

Thanks and kind regards
Uffe

>
> Kind regards,
>
>    Wolfram
>
> Changes since RFC v1:
>
> * rebased to mmc/next as of today
> * reworded commit message for patch 1
> * added tested-tag from Shimoda-san for patch 1
> * added patch 2
>
> Wolfram Sang (2):
>   mmc: core: check also R1 response for stop commands
>   mmc: core: for data errors, take response of stop cmd into account
>
>  drivers/mmc/core/block.c | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
>
> Patch to simulate ECC errors:
>
> diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
> index a2d92f10501bdd..9773c7e5e4d154 100644
> --- a/drivers/mmc/host/tmio_mmc_pio.c
> +++ b/drivers/mmc/host/tmio_mmc_pio.c
> @@ -553,6 +553,8 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
>         }
>
>         if (stop) {
> +               static unsigned int induce_cnt = 0;
> +
>                 if (stop->opcode != MMC_STOP_TRANSMISSION || stop->arg)
>                         dev_err(&host->pdev->dev, "unsupported stop: CMD%u,0x%x. We did CMD12,0\n",
>                                 stop->opcode, stop->arg);
> @@ -560,6 +562,9 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
>                 /* fill in response from auto CMD12 */
>                 stop->resp[0] = sd_ctrl_read16_and_16_as_32(host, CTL_RESPONSE);
>
> +               if (induce_cnt++ % 100 == 0)
> +                       stop->resp[0] |= R1_CARD_ECC_FAILED;
> +
>                 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0);
>         }
>
> --
> 2.11.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux