Remove MMC bounce buffer config option and associated code. This
is proposed in addition to Linus' changes to remove the config
option. I have tested this on our Octeon hardware platforms.
Signed-off-by: Steven J. Hill <Steven.Hill@xxxxxxxxxx>
---
arch/arm/configs/colibri_pxa300_defconfig | 1 -
arch/arm/configs/davinci_all_defconfig | 1 -
arch/arm/configs/lpc32xx_defconfig | 1 -
arch/arm/configs/nhk8815_defconfig | 1 -
arch/arm/configs/sama5_defconfig | 1 -
arch/arm/configs/u300_defconfig | 1 -
arch/arm/configs/zeus_defconfig | 1 -
arch/blackfin/configs/CM-BF533_defconfig | 1 -
arch/blackfin/configs/CM-BF537E_defconfig | 1 -
arch/mips/configs/cavium_octeon_defconfig | 1 -
arch/mips/configs/qi_lb60_defconfig | 1 -
drivers/mmc/core/Kconfig | 18 -----
drivers/mmc/core/queue.c | 109 +++---------------------------
drivers/mmc/host/davinci_mmc.c | 6 +-
include/linux/mmc/card.h | 1 -
15 files changed, 9 insertions(+), 136 deletions(-)
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index be02fe2..10c940c 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -51,7 +51,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_PXA=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 67db829..8a8f086 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -188,7 +188,6 @@ CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_DAVINCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 6ba430d..655edfd 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -146,7 +146,6 @@ CONFIG_USB_LPC32XX=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 7d2ad30..e113d4a 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -95,7 +95,6 @@ CONFIG_GPIO_STMPE=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 777c9e9..c330071 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -180,7 +180,6 @@ CONFIG_USB_GADGET=y
CONFIG_USB_ATMEL_USBA=y
CONFIG_USB_G_SERIAL=y
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_AT91=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index aaa95ab..d6eb9fe 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -50,7 +50,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index cd11da8..a126f7b 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -146,7 +146,6 @@ CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_PXA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 9a5716d..7a40109 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -59,7 +59,6 @@ CONFIG_SPI_BFIN5XX=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_SPI=m
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 6845928..b47ced8 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -83,7 +83,6 @@ CONFIG_GPIO_SYSFS=y
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_SPI=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig
index d4fda41..7f337cf 100644
--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@@ -130,7 +130,6 @@ CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_MMC=y
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not set
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_CAVIUM_OCTEON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig
index d7bb8cc..df067bc 100644
--- a/arch/mips/configs/qi_lb60_defconfig
+++ b/arch/mips/configs/qi_lb60_defconfig
@@ -110,7 +110,6 @@ CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_JZ4740=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_JZ4740=y
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index fc1ecda..42e8906 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -61,24 +61,6 @@ config MMC_BLOCK_MINORS
If unsure, say 8 here.
-config MMC_BLOCK_BOUNCE
- bool "Use bounce buffer for simple hosts"
- depends on MMC_BLOCK
- default y
- help
- SD/MMC is a high latency protocol where it is crucial to
- send large requests in order to get high performance. Many
- controllers, however, are restricted to continuous memory
- (i.e. they can't do scatter-gather), something the kernel
- rarely can provide.
-
- Say Y here to help these restricted hosts by bouncing
- requests back and forth from a large buffer. You will get
- a big performance gain at the cost of up to 64 KiB of
- physical memory.
-
- If unsure, say Y here.
-
config SDIO_UART
tristate "SDIO UART/GPS class support"
depends on TTY
diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index 5c37b6b..0dcf31d 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -23,8 +23,6 @@
#include "core.h"
#include "card.h"
-#define MMC_QUEUE_BOUNCESZ 65536
-
/*
* Prepare a MMC request. This just filters out odd stuff.
*/
@@ -219,73 +217,6 @@ static struct mmc_queue_req *mmc_queue_alloc_mqrqs(int qdepth)
return mqrq;
}
-#ifdef CONFIG_MMC_BLOCK_BOUNCE
-static int mmc_queue_alloc_bounce_bufs(struct mmc_queue_req *mqrq, int qdepth,
- unsigned int bouncesz)
-{
- int i;
-
- for (i = 0; i < qdepth; i++) {
- mqrq[i].bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
- if (!mqrq[i].bounce_buf)
- return -ENOMEM;
-
- mqrq[i].sg = mmc_alloc_sg(1);
- if (!mqrq[i].sg)
- return -ENOMEM;
-
- mqrq[i].bounce_sg = mmc_alloc_sg(bouncesz / 512);
- if (!mqrq[i].bounce_sg)
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static bool mmc_queue_alloc_bounce(struct mmc_queue_req *mqrq, int qdepth,
- unsigned int bouncesz)
-{
- int ret;
-
- ret = mmc_queue_alloc_bounce_bufs(mqrq, qdepth, bouncesz);
- if (ret)
- mmc_queue_reqs_free_bufs(mqrq, qdepth);
-
- return !ret;
-}
-
-static unsigned int mmc_queue_calc_bouncesz(struct mmc_host *host)
-{
- unsigned int bouncesz = MMC_QUEUE_BOUNCESZ;
-
- if (host->max_segs != 1)
- return 0;
-
- if (bouncesz > host->max_req_size)
- bouncesz = host->max_req_size;
- if (bouncesz > host->max_seg_size)
- bouncesz = host->max_seg_size;
- if (bouncesz > host->max_blk_count * 512)
- bouncesz = host->max_blk_count * 512;
-
- if (bouncesz <= 512)
- return 0;
-
- return bouncesz;
-}
-#else
-static inline bool mmc_queue_alloc_bounce(struct mmc_queue_req *mqrq,
- int qdepth, unsigned int bouncesz)
-{
- return false;
-}
-
-static unsigned int mmc_queue_calc_bouncesz(struct mmc_host *host)
-{
- return 0;
-}
-#endif
-
static int mmc_queue_alloc_sgs(struct mmc_queue_req *mqrq, int qdepth,
int max_segs)
{
@@ -312,7 +243,6 @@ static int __mmc_queue_alloc_shared_queue(struct mmc_card *card, int qdepth)
{
struct mmc_host *host = card->host;
struct mmc_queue_req *mqrq;
- unsigned int bouncesz;
int ret = 0;
if (card->mqrq)
@@ -325,26 +255,10 @@ static int __mmc_queue_alloc_shared_queue(struct mmc_card *card, int qdepth)
card->mqrq = mqrq;
card->qdepth = qdepth;
- bouncesz = mmc_queue_calc_bouncesz(host);
-
- if (bouncesz && !mmc_queue_alloc_bounce(mqrq, qdepth, bouncesz)) {
- bouncesz = 0;
- pr_warn("%s: unable to allocate bounce buffers\n",
- mmc_card_name(card));
- }
-
- card->bouncesz = bouncesz;
-
- if (!bouncesz) {
- ret = mmc_queue_alloc_sgs(mqrq, qdepth, host->max_segs);
- if (ret)
- goto out_err;
- }
-
- return ret;
+ ret = mmc_queue_alloc_sgs(mqrq, qdepth, host->max_segs);
+ if (ret)
+ mmc_queue_free_shared_queue(card);
-out_err:
- mmc_queue_free_shared_queue(card);
return ret;
}
@@ -387,18 +301,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
if (mmc_can_erase(card))
mmc_queue_setup_discard(mq->queue, card);
- if (card->bouncesz) {
- blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
- blk_queue_max_hw_sectors(mq->queue, card->bouncesz / 512);
- blk_queue_max_segments(mq->queue, card->bouncesz / 512);
- blk_queue_max_segment_size(mq->queue, card->bouncesz);
- } else {
- blk_queue_bounce_limit(mq->queue, limit);
- blk_queue_max_hw_sectors(mq->queue,
- min(host->max_blk_count, host->max_req_size / 512));
- blk_queue_max_segments(mq->queue, host->max_segs);
- blk_queue_max_segment_size(mq->queue, host->max_seg_size);
- }
+ blk_queue_bounce_limit(mq->queue, limit);
+ blk_queue_max_hw_sectors(mq->queue,
+ min(host->max_blk_count, host->max_req_size / 512));
+ blk_queue_max_segments(mq->queue, host->max_segs);
+ blk_queue_max_segment_size(mq->queue, host->max_seg_size);
sema_init(&mq->thread_sem, 1);
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 621ce47..2c6d131 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -149,11 +149,7 @@
/*
* One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
- * and we handle up to MAX_NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
- * for drivers with max_segs == 1, making the segments bigger (64KB)
- * than the page or two that's otherwise typical. nr_sg (passed from
- * platform data) == 16 gives at least the same throughput boost, using
- * EDMA transfer linkage instead of spending CPU time copying pages.
+ * and we handle up to MAX_NR_SG segments.
*/
#define MAX_CCNT ((1 << 16) - 1)
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index aad015e..23653c7 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -306,7 +306,6 @@ struct mmc_card {
unsigned int nr_parts;
struct mmc_queue_req *mqrq; /* Shared queue structure */
- unsigned int bouncesz; /* Bounce buffer size */
int qdepth; /* Shared queue depth */
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
