For hosts not supporting MMC_CAP2_SDIO_IRQ_NOTHREAD but MMC_CAP_SDIO_IRQ,
the SDIO IRQs are processed from a dedicated kernel thread. For these
cases, the host calls mmc_signal_sdio_irq() from its ISR to signal a new
SDIO IRQ.
Signaling an SDIO IRQ makes the host's ->enable_sdio_irq() callback to be
invoked to temporary disable the IRQs, before the kernel thread is woken up
to process it. When processing of the IRQs are completed, they are
re-enabled by the kernel thread, again via invoking the host's
->enable_sdio_irq().
The observation from this, is that the execution path is being unnecessary
complex, as the host driver already knows that it needs to temporary
disable the IRQs before signaling a new one. Moreover, replacing the kernel
thread with a work/workqueue would not only greatly simplify the code, but
also make it more robust.
To address the above problems, let's continue to build upon the support for
MMC_CAP2_SDIO_IRQ_NOTHREAD, as it already implements SDIO IRQs to be
processed without using the clumsy kernel thread and without the ping-pong
calls of the host's ->enable_sdio_irq() callback for each processed IRQ.
Therefore, let's add new API sdio_signal_irq(), which enables hosts to
signal/process SDIO IRQs by using a work/workqueue, rather than using the
kernel thread.
Add also a new host callback ->ack_sdio_irq(), which the work invokes when
the SDIO IRQs have been processed. This informs the host about when it
shall re-enable the SDIO IRQs. Potentially, we could re-use the existing
->enable_sdio_irq() callback instead of adding a new one, however it has
turned out that it's more convenient for hosts to get this information via
a separate callback.
Hosts that wants to use this new method to signal/process SDIO IRQs, must
enable MMC_CAP2_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq()
callback.
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v3:
- Switched to use system_wq, as system_freezable_wq doesn't work.
- Use a delayed_work instead of a regular work. It's needed in next step
when implementing SDIO IRQ polling.
---
drivers/mmc/core/host.c | 2 ++
drivers/mmc/core/sdio_irq.c | 16 ++++++++++++++++
drivers/mmc/core/sdio_ops.h | 2 ++
include/linux/mmc/host.h | 3 +++
4 files changed, 23 insertions(+)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 3f8c85d..8823c97 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -30,6 +30,7 @@
#include "host.h"
#include "slot-gpio.h"
#include "pwrseq.h"
+#include "sdio_ops.h"
#define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev)
@@ -379,6 +380,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
spin_lock_init(&host->lock);
init_waitqueue_head(&host->wq);
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
+ INIT_DELAYED_WORK(&host->sdio_irq_work, sdio_irq_work);
setup_timer(&host->retune_timer, mmc_retune_timer, (unsigned long)host);
/*
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 44d9c86..c771843 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -98,11 +98,27 @@ void sdio_run_irqs(struct mmc_host *host)
if (host->sdio_irqs) {
host->sdio_irq_pending = true;
process_sdio_pending_irqs(host);
+ if (host->ops->ack_sdio_irq)
+ host->ops->ack_sdio_irq(host);
}
mmc_release_host(host);
}
EXPORT_SYMBOL_GPL(sdio_run_irqs);
+void sdio_irq_work(struct work_struct *work)
+{
+ struct mmc_host *host =
+ container_of(work, struct mmc_host, sdio_irq_work.work);
+
+ sdio_run_irqs(host);
+}
+
+void sdio_signal_irq(struct mmc_host *host)
+{
+ queue_delayed_work(system_wq, &host->sdio_irq_work, 0);
+}
+EXPORT_SYMBOL_GPL(sdio_signal_irq);
+
static int sdio_irq_thread(void *_host)
{
struct mmc_host *host = _host;
diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
index ee35cb4..96945ca 100644
--- a/drivers/mmc/core/sdio_ops.h
+++ b/drivers/mmc/core/sdio_ops.h
@@ -17,6 +17,7 @@
struct mmc_host;
struct mmc_card;
+struct work_struct;
int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
@@ -25,6 +26,7 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
int sdio_reset(struct mmc_host *host);
unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz);
+void sdio_irq_work(struct work_struct *work);
static inline bool sdio_is_io_busy(u32 opcode, u32 arg)
{
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 21385ac..f186b26 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -130,6 +130,7 @@ struct mmc_host_ops {
int (*get_cd)(struct mmc_host *host);
void (*enable_sdio_irq)(struct mmc_host *host, int enable);
+ void (*ack_sdio_irq)(struct mmc_host *host);
/* optional callback for HC quirks */
void (*init_card)(struct mmc_host *host, struct mmc_card *card);
@@ -358,6 +359,7 @@ struct mmc_host {
unsigned int sdio_irqs;
struct task_struct *sdio_irq_thread;
+ struct delayed_work sdio_irq_work;
bool sdio_irq_pending;
atomic_t sdio_irq_thread_abort;
@@ -428,6 +430,7 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host)
}
void sdio_run_irqs(struct mmc_host *host);
+void sdio_signal_irq(struct mmc_host *host);
#ifdef CONFIG_REGULATOR
int mmc_regulator_get_ocrmask(struct regulator *supply);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
