On 25/04/17 15:24, Ulf Hansson wrote: > On 25 April 2017 at 13:20, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: >> On 25/04/17 13:46, Ulf Hansson wrote: >>> On 25 April 2017 at 09:57, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: >>>> On 25/04/17 10:52, Ulf Hansson wrote: >>>>> +Grygorii Strashko >>>>> >>>>> On 25 April 2017 at 08:21, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: >>>>>> On 24/04/17 23:33, Ulf Hansson wrote: >>>>>>> On 21 April 2017 at 12:08, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: >>>>>>>> The SDIO card state might be being preserved during hibernation, for >>>>>>>> example a SDIO wifi card supporting WOWLAN. That state will be lost if an >>>>>>>> SDIO reset is done. One way to avoid that would be to build mmc core as a >>>>>>>> module and simply not load it until after attempting to restore the >>>>>>>> hibernation image. However that won't work if the hibernation image is >>>>>>>> stored on eMMC which, of course, requires mmc core. >>>>>>> >>>>>>> I don't follow here. Are you saying the SDIO card is kept powered in >>>>>>> hibernation, as to be able to support WOWLAN, right? >>>>>> >>>>>> Yes >>>>> >>>>> Okay, makes sense! >>>>> >>>>>> >>>>>>> >>>>>>> Then, it feels plain wrong the mmc_rescan() tries to re-initialize it. >>>>>>> That should never happen, unless something is broken of course. >>>>>> >>>>>> The thing to note about hibernation is that there is a regular boot in >>>>>> between saving the hibernation image and restoring it again. At boot time, >>>>>> the kernel knows almost nothing about whether there is a hibernation image >>>>>> and whether or not it will be restored. Consequently it becomes difficult >>>>>> to avoid mmc_rescan(). As mentioned above, we need mmc_rescan() to >>>>>> initialize the eMMC so that the hibernation image can be read. >>>>> >>>>> What's wrong with using the hibernation callbacks in the struct >>>>> dev_pm_ops? We already do this. >>>> >>>> Here is the scenario. The kernel has just booted. User space wants to try >>>> to restore a hibernation image, if there is one. So user space loads the >>>> mmc core because the hibernation image is on eMMC. Mmc core does an SDIO >>>> reset on the SDIO card and the state is lost. It has little to do with pm >>>> callbacks AFAICS. >>> >>> Ah, now I see what you mean. I thought the problem was during the >>> actual restoring of the hibernation image. >>> >>> Alright, when a boot is triggered by WOWLAN , you want to avoid >>> sending the reset command for the SDIO card before the >>> re-initialization of the SDIO card starts. >>> >>> The problem with this approach is that you can't differentiate between >>> a cold boot and a boot triggered by WOWLAN, right!? In other words, in >>> some cases the reset command may be needed while in other it won't. >> >> SDIO reset is only needed if the card has not been power-cycled. The >> assumption is that the platform takes care of that when needed. e.g. when >> rebooting instead of going to S4. >> >>> >>> Maybe you can elaborate more on what exactly what the problem is with >>> sending the reset command when the boot is triggered from WOWLAN? Yes, >>> the SDIO card loses its context, but how is that a problem? >> >> The wifi driver expects to find the function in an initialized state. > > So how does the the wifi driver distinguish this a boot caused by > WOWLAN - and not a cold boot? It doesn't have to. It doesn't get loaded until after the attempt to restore the hibernation image. So in the hibernation case it has its ->restore() callback. If there is no hibernation image, it gets loaded and probed. AFAICT that is the normal way to stop drivers interfering with hibernation i.e. don't load them until after the attempt is made to restore the hibernation image. We could do that with mmc core too, but for the fact that the hibernation image is on eMMC. > >> Otherwise it would have to re-enable the function and re-do the >> function-specific initialization. I don't know if there are other > > At boot the SDIO func driver becomes probed, when the mmc core finds > and SDIO card and then registers a func device for it. Are you saying > that the SDIO func driver can take shortcuts when enabling the func > device, when the boot is trigger from WOWLAN? No. > >> consequences. Presumably it will have lost any information about the nature >> of the wake-up trigger. > > How does that matter? I don't know if it matters. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
