So far the driver name is used as interrupt description, therefore in /proc/interrupts it's not possible to tell which interrupt belongs to which port. Change this by switching to NULL what causes the default (device name) to be used. In our case that's the DT node name. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- drivers/mmc/host/meson-gx-mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index cf2ccc67..b0a9317b 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -740,7 +740,7 @@ static int meson_mmc_probe(struct platform_device *pdev) ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq, meson_mmc_irq_thread, IRQF_SHARED, - DRIVER_NAME, host); + NULL, host); if (ret) goto err_div_clk; -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
