On 18 March 2017 at 02:13, Sergio Prado <sergio.prado@xxxxxxxxxxxxxx> wrote: > This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO > controller via device tree. > > Tested on FriendlyARM mini2440, based on s3c2440 SoC. > > Changes since v4 (as suggested by Jaehoon Chung): > - using just a flag as a data structure for the driver to check for > s3c2400 compatibility > > Changes since v3 (as suggested by Rob Herring): > - describing properties that wasn't documented and removing unnecessary > comment in the device tree binding > > Changes since v2: > - struct "s3cmci_drv_data" and flag "is2440" renamed > - copying the whole driver data struct instead of only its member so > it will be easier to extend the information in the future > - using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties > from device tree > > Changes since v1: > - pinctrl description removed from DT binding > - unit and label on DT binding renamed to mmc > > Sergio Prado (2): > dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller > mmc: host: s3cmci: allow probing from device tree > > .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++ > drivers/mmc/host/s3cmci.c | 257 ++++++++++----------- > 2 files changed, 168 insertions(+), 131 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt > > -- > 1.9.1 > Thanks, applied for next! Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
