We don't need variable cmd_cfg_timeout, so remove it and simplify the
code a little.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
drivers/mmc/host/meson-gx-mmc.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 87303404..b917765c 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -426,7 +426,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
struct meson_host *host = mmc_priv(mmc);
struct mmc_data *data = cmd->data;
u32 cfg, cmd_cfg = 0, cmd_data = 0;
- u8 blk_len, cmd_cfg_timeout;
+ u8 blk_len;
unsigned int xfer_bytes = 0;
/* Setup descriptors */
@@ -454,6 +454,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
/* data? */
if (data) {
cmd_cfg |= CMD_CFG_DATA_IO;
+ cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) <<
+ CMD_CFG_TIMEOUT_SHIFT;
+
if (data->blocks > 1) {
cmd_cfg |= CMD_CFG_BLOCK_MODE;
cmd_cfg |= (data->blocks & CMD_CFG_LENGTH_MASK) <<
@@ -488,13 +491,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
}
cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
-
- cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
} else {
- cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
+ cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << CMD_CFG_TIMEOUT_SHIFT;
}
- cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
- CMD_CFG_TIMEOUT_SHIFT;
host->cmd = cmd;
--
2.12.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
