Re: [PATCH v2 2/2] mmc: sdhci: intel: Disable runtime pm when the sdio_irq is enabled.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15 March 2017 at 17:31, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> SDIO cards may need clock to send the card interrupt to the host.
>
> On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch
> pinging the tablet results in:
>
> PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
> 64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms
> 64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms
> 64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms
> 64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms
> 64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms
> 64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms
> 64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms
> 64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms
> 64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms
> 64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms
>
> Where as with this patch I get:
>
> PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
> 64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms
> 64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms
> 64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms
> 64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms
> 64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms
> 64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms
> 64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms
> 64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms
> 64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms
> 64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms
>
> Cc: Dong Aisheng <b29396@xxxxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> Changes in v2:
> -New patch replacing "mmc: sdhci: sdio-intel: Set
>  SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk"
> ---
>  drivers/mmc/host/sdhci-acpi.c     | 1 +
>  drivers/mmc/host/sdhci-pci-core.c | 1 +
>  drivers/mmc/host/sdhci.c          | 6 ++++++
>  drivers/mmc/host/sdhci.h          | 2 ++
>  4 files changed, 10 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
> index 237f318..53b431a 100644
> --- a/drivers/mmc/host/sdhci-acpi.c
> +++ b/drivers/mmc/host/sdhci-acpi.c
> @@ -288,6 +288,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
>  static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
>         .quirks  = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
>         .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
> +                  SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM |
>                    SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
>         .caps    = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
>                    MMC_CAP_WAIT_WHILE_BUSY,
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 982b3e3..a3b242e 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -498,6 +498,7 @@ static const struct sdhci_pci_fixes sdhci_ni_byt_sdio = {
>  static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
>         .quirks         = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
>         .quirks2        = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
> +                       SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM |
>                         SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
>         .allow_runtime_pm = true,
>         .probe_slot     = byt_sdio_probe_slot,
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 6fdd7a7..59c5cad 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1828,6 +1828,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
>         struct sdhci_host *host = mmc_priv(mmc);
>         unsigned long flags;
>
> +       if ((host->quirks2 & SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM) && enable)
> +               pm_runtime_get(host->mmc->parent);

There are currently no sdhci variant for any SoC that implements
wakeup support in runtime suspend for SDIO irqs. In other words, it
seems all sdhci hosts suffers from the same problem.

I imagine there are vendor trees implementing wakeups, however until
we see such code being pushed upstream, I suggest we make this the
default behavior instead of using a quirk.

> +
>         spin_lock_irqsave(&host->lock, flags);
>         if (enable)
>                 host->flags |= SDHCI_SDIO_IRQ_ENABLED;
> @@ -1836,6 +1839,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
>
>         sdhci_enable_sdio_irq_nolock(host, enable);
>         spin_unlock_irqrestore(&host->lock, flags);
> +
> +       if ((host->quirks2 & SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM) && !enable)
> +               pm_runtime_put(host->mmc->parent);
>  }
>
>  static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index edf3adf..b72c38d 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -427,6 +427,8 @@ struct sdhci_host {
>  #define SDHCI_QUIRK2_ACMD23_BROKEN                     (1<<14)
>  /* Broken Clock divider zero in controller */
>  #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN             (1<<15)
> +/* Must not runtime suspend when sdio_irq is enabled */
> +#define SDHCI_QUIRK2_SDIO_IRQ_NO_RUNTIME_PM            (1<<16)
>
>         int irq;                /* Device IRQ */
>         void __iomem *ioaddr;   /* Mapped address */
> --
> 2.9.3
>

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux