On Fri, Mar 17, 2017 at 09:31:23AM +0100, Ulf Hansson wrote:
> On 10 March 2017 at 14:24, Jan Glauber <jglauber@xxxxxxxxxx> wrote:
> > Add description of Cavium Octeon and ThunderX SOC device tree bindings.
> >
> > CC: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > CC: Rob Herring <robh+dt@xxxxxxxxxx>
> > CC: Mark Rutland <mark.rutland@xxxxxxx>
> > CC: devicetree@xxxxxxxxxxxxxxx
> >
> > Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
> > Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
> > Signed-off-by: Steven J. Hill <steven.hill@xxxxxxxxxx>
> > Acked-by: Rob Herring <robh+dt@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/mmc/cavium-mmc.txt | 58 ++++++++++++++++++++++
> > 1 file changed, 58 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mmc/cavium-mmc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
> > new file mode 100644
> > index 0000000..225c2be
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
> > @@ -0,0 +1,58 @@
> > +* Cavium Octeon & ThunderX MMC controller
> > +
> > +The highspeed MMC host controller on Caviums SoCs provides an interface
> > +for MMC and SD types of memory cards.
> > +
> > +Supported maximum speeds are the ones of the eMMC standard 4.41 as well
> > +as the speed of SD standard 4.0. Only 3.3 Volt is supported.
> > +
> > +Required properties:
> > + - compatible : should be one of:
> > + cavium,octeon-6130-mmc
> > + cavium,octeon-6130-mmc-slot
> > + cavium,octeon-7890-mmc
> > + cavium,octeon-7890-mmc-slot
> > + cavium,thunder-8190-mmc
> > + cavium,thunder-8190-mmc-slot
> > + cavium,thunder-8390-mmc
> > + cavium,thunder-8390-mmc-slot
> > + - reg : mmc controller base registers
> > + - clocks : phandle
> > +
> > +Optional properties:
> > + - for cd, bus-width and additional generic mmc parameters
> > + please refer to mmc.txt within this directory
> > + - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command
> > + - cavium,dat-clk-skew : number of coprocessor clocks before sampling data
> > +
> > +Deprecated properties:
> > +- spi-max-frequency : use max-frequency instead
> > +- cavium,bus-max-width : use bus-width instead
> > +
> > +Examples:
> > + mmc_1_4: mmc@1,4 {
> > + compatible = "cavium,thunder-8390-mmc";
> > + reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clocks = <&sclk>;
> > +
> > + mmc-slot@0 {
> > + compatible = "cavium,thunder-8390-mmc-slot";
> > + reg = <0>;
>
> Just realized that I forgotten to follow up about the details for I
> think we should generally describe slots nodes in DT.
>
> Currently we treat a child node of a host device node, with reg=0 as
> being an embedded mmc card [1] (in case it has the "mmc-card"
> compatible set).
> When reg is 1->7, those are reserved for SDIO function nodes [2] (as
> those can be exactly 7, according to the SDIO spec).
>
> Let's take the above into account and consider that a slot node may
> also require a its own child node as to describe an embedded mmc card
> or SDIO funcs. In this context I don't think it makes sense to use SoC
> specific compatibles for slot nodes, instead I suggest we use only
> "mmc-slot".
>
> Does that makes sense?
The slot compatible is currently not used, setting it to "mmc-slot"
looks like good to me.
--Jan
> > + vmmc-supply = <&mmc_supply_3v3>;
> > + max-frequency = <42000000>;
> > + bus-width = <4>;
> > + cap-sd-highspeed;
> > + };
> > +
> > + mmc-slot@1 {
> > + compatible = "cavium,thunder-8390-mmc-slot";
> > + reg = <1>;
> > + vmmc-supply = <&mmc_supply_3v3>;
> > + max-frequency = <42000000>;
> > + bus-width = <8>;
> > + cap-mmc-highspeed;
> > + non-removable;
> > + };
> > + };
> > --
> > 2.9.0.rc0.21.g7777322
> >
>
> Kind regards
> Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
