+ stable
On 14 March 2017 at 14:06, Ludovic Desroches
<ludovic.desroches@xxxxxxxxxxxxx> wrote:
> On Thu, Mar 09, 2017 at 04:18:20PM +0100, Romain Izard wrote:
>> The SDHCI controller in the SAMA5D2 chip requires a valid voltage set
>> in the power control register, otherwise commands will fail with a
>> timeout error.
>>
>> When using the regulator framework to specify the regulator used by the
>> mmc device, the voltage is not configured, and it is not possible to use
>> the connected device.
>>
>> Implement a custom 'set_power' function for this specific hardware, that
>> configures the voltage in the register in all cases.
>>
>> Signed-off-by: Romain Izard <romain.izard.pro@xxxxxxxxx>
Thanks, applied for fixes and by correcting a "contoller" to
"controller" as pointed out by Ludovic.
Kind regards
Uffe
>
> Cc: stable@xxxxxxxxxxxxxxx #4.9+
>
> Can be added since sdhci_set_power_noreg was introduced in 4.9.
>
>> ---
>> drivers/mmc/host/sdhci-of-at91.c | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
>> index 2f9ad213377a..291a74955a4c 100644
>> --- a/drivers/mmc/host/sdhci-of-at91.c
>> +++ b/drivers/mmc/host/sdhci-of-at91.c
>> @@ -85,11 +85,30 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
>> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>> }
>>
>> +/*
>> + * In this specific implementation of the SDHCI contoller, the power register
>> + * needs to have a valid voltage set even when the power supply is managed by
>> + * an external regulator.
>> + */
>> +static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
>> + unsigned short vdd)
>> +{
>> + if (!IS_ERR(host->mmc->supply.vmmc)) {
>> + struct mmc_host *mmc = host->mmc;
>> +
>> + spin_unlock_irq(&host->lock);
>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>> + spin_lock_irq(&host->lock);
>> + }
>> + sdhci_set_power_noreg(host, mode, vdd);
>> +}
>> +
>> static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
>> .set_clock = sdhci_at91_set_clock,
>> .set_bus_width = sdhci_set_bus_width,
>> .reset = sdhci_reset,
>> .set_uhs_signaling = sdhci_set_uhs_signaling,
>> + .set_power = sdhci_at91_set_power,
>> };
>>
>> static const struct sdhci_pltfm_data soc_data_sama5d2 = {
>> --
>> 2.9.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
