From: yong mao <yong.mao@xxxxxxxxxxxx> This patch can fix two issues: Issue 1: In previous code, div may be overflow when setting clock frequency as f_min. We can use DIV_ROUND_UP to fix this boundary related issue. Issue 2: In previous code, we can not set the correct clock frequency when div equals 0xff. Signed-off-by: Yong Mao <yong.mao@xxxxxxxxxxxx> Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx> --- drivers/mmc/host/mtk-sd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 07f3236..3ad5228 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -591,7 +591,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz) } } sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV, - (mode << 8) | (div % 0xff)); + (mode << 8) | div); sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN); while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB)) cpu_relax(); @@ -1692,7 +1692,7 @@ static int msdc_drv_probe(struct platform_device *pdev) host->src_clk_freq = clk_get_rate(host->src_clk); /* Set host parameters to mmc */ mmc->ops = &mt_msdc_ops; - mmc->f_min = host->src_clk_freq / (4 * 255); + mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255); mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23; /* MMC core transfer sizes tunable parameters */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
