Re: [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 03.03.2017 um 22:19 schrieb Kevin Hilman:
> Heiner Kallweit <hkallweit1@xxxxxxxxx> writes:
> 
>> New series is limited to smaller refactorings w/o functional changes.
> 
> I'd reviewed this series before, but hadn't actually tested it until
> today.  I applied this series onto today's linux-next, and tested on
> meson-gxbb-odroidc2 and the kernel hangs up right after:
> 
>        meson-gx-mmc d0072000.mmc: Got CD GPIO
> 
> with no error message or oops/backtrace etc.
> 
> Could you clarify how you are testing this, on what tree/branch, on what
> hardware etc.?
> 
I'm testing on Odroid C2 with a self-built uboot based on the latest
mainline uboot incl. an own eMMC driver which was submitted but is
not yet applied to mainline uboot.
The system is running headless with a serial console attached.
Storage is a 128 GB Hardkernel eMMC card.

I use latest next kernel + the patches to test.

Does your system work w/o the current patch set?
And do you use HS200 or HS400 mode?

I also figured out that 200MHz w/o tuning is a little fragile and
reduced the clock to 60 MHz. This makes no difference in performance
as the driver currently is very slow anyway (only 10 - 15 MB/s).
When the clock is too high I see lots of CRC errors on the serial
console.

This will change with further patches I have in my tree.
They allow stable HS200/HS400 with quite basic tuning resulting in
140 MB/s read performance.
Stable configuration here is: 180° core clock phase, 0° tx clock
phase, 180° rx clock phase.

> Also, in the cover letter, it's customary to include a summary of what
> changed since the previous version(s)
> 
> Kevin
> 
>> Heiner Kallweit (10):
>>   mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
>>   mmc: meson-gx: make two functions return void
>>   mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host
>>   mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init
>>   mmc: meson-gx: remove member parent_mux from struct meson_host
>>   mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init
>>   mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init
>>   mmc: meson-gx: improve initial configuration
>>   mmc: meson-gx: remove member mrq from struct meson_host
>>   mmc: meson-gx: replace magic timeout numbers with constants
>>
>>  drivers/mmc/host/meson-gx-mmc.c | 126 ++++++++++++++++------------------------
>>  1 file changed, 50 insertions(+), 76 deletions(-)
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux