This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO controller via device tree. Tested on FriendlyARM mini2440, based on s3c2440 SoC. Changes since v3 (as suggested by Rob Herring) - describing properties that wasn't documented and removing unnecessary comment in the device tree binding Changes since v2: - struct "s3cmci_drv_data" and flag "is2440" renamed - copying the whole driver data struct instead of only its member so it will be easier to extend the information in the future - using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties from device tree Changes since v1: - pinctrl description removed from DT binding - unit and label on DT binding renamed to mmc Sergio Prado (2): dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller mmc: host: s3cmci: allow probing from device tree .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 +++ drivers/mmc/host/s3cmci.c | 298 +++++++++++---------- drivers/mmc/host/s3cmci.h | 3 +- 3 files changed, 200 insertions(+), 143 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
