[PATCH 2/2] [2/2] mmc: sdhci-cadence: Update PHY delay configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DTS properties are used instead of fixed data
because PHY settings can be different for different platforms.
Configuration of new three PHY delays were added

Signed-off-by: Piotr Sroka <piotrs@xxxxxxxxxxx>
---
 .../devicetree/bindings/mmc/sdhci-cadence.txt      | 54 ++++++++++++++
 drivers/mmc/host/sdhci-cadence.c                   | 83 +++++++++++++++++++---
 2 files changed, 129 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
index c0f37cb..221d3fe 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
@@ -19,6 +19,59 @@ if supported.  See mmc.txt for details.
 - mmc-hs400-1_8v
 - mmc-hs400-1_2v
 
+- phy-input-delay-sd-hs:
+  Value of the delay in the input path for High Speed work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-sd-default:
+  Value of the delay in the input path for Default Speed work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-sd-sdr12:
+  Value of the delay in the input path for SDR12 work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-sd-sdr25:
+  Value of the delay in the input path for SDR25 work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-sd-sdr50:
+  Value of the delay in the input path for SDR50 work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-sd-ddr50:
+  Value of the delay in the input path for DDR50 work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-emmc-legacy:
+  Value of the delay in the input path for eMMC legacy work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-emmc-sdr:
+  Value of the delay in the input path for eMMC SDR work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-input-delay-emmc-ddr:
+  Value of the delay in the input path for eMMC DDR work mode.
+  Valid range = [0:0x1F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-dll-delay-sdclk:
+  Value of the delay introduced on the sdclk output
+  for all modes except HS200, HS400 and HS400_ES.
+  Valid range = [0:0x7F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-dll-delay-sdclk-hsmmc:
+  Value of the delay introduced on the sdclk output
+  for HS200, HS400 and HS400_ES speed modes.
+  Valid range = [0:0x7F].
+  Delay configuration stay unchanged if this property is not provided.
+- phy-dll-delay-strobe:
+  Value of the delay introduced on the dat_strobe input
+  used in HS400 / HS400_ES speed modes.
+  Valid range = [0:0x7F].
+  Delay configuration stay unchanged if this property is not provided.
+
+
 Example:
 	emmc: sdhci@5a000000 {
 		compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
@@ -29,4 +82,5 @@ Example:
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		mmc-hs400-1_8v;
+		phy-input-delay-sd-hs = <0>;
 	};
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index c946e45..6c338d2 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -17,6 +17,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/mmc/host.h>
+#include <linux/of.h>
 
 #include "sdhci-pltfm.h"
 
@@ -53,6 +54,9 @@
 #define SDHCI_CDNS_PHY_DLY_EMMC_LEGACY	0x06
 #define SDHCI_CDNS_PHY_DLY_EMMC_SDR	0x07
 #define SDHCI_CDNS_PHY_DLY_EMMC_DDR	0x08
+#define SDHCI_CDNS_PHY_DLY_SDCLK	0x0b
+#define SDHCI_CDNS_PHY_DLY_HSMMC	0x0c
+#define SDHCI_CDNS_PHY_DLY_STROBE	0x0d
 
 /*
  * The tuned val register is 6 bit-wide, but not the whole of the range is
@@ -89,13 +93,73 @@ static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
 	return 0;
 }
 
-static void sdhci_cdns_phy_init(struct sdhci_cdns_priv *priv)
+static int sdhci_cdns_phy_parse_dt(struct device_node *np,
+				   struct sdhci_cdns_priv *priv)
 {
-	sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_HS, 4);
-	sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_DEFAULT, 4);
-	sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_LEGACY, 9);
-	sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_SDR, 2);
-	sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_DDR, 3);
+	u32 tmp;
+	int ret;
+
+	if (!of_property_read_u32(np, "phy-input-delay-sd-hs", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_SD_HS, tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-input-delay-sd-default", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_SD_DEFAULT,
+					       tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-input-delay-sd-sdr12", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_UHS_SDR12,
+					       tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-input-delay-sd-sdr25", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_UHS_SDR25,
+					       tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-input-delay-sd-sdr50", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_UHS_SDR50,
+					       tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-input-delay-sd-ddr50", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_UHS_DDR50,
+					       tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-dll-delay-sdclk", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_SDCLK, tmp);
+
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-dll-delay-sdclk-hsmmc", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_HSMMC, tmp);
+		if (ret)
+			return ret;
+	}
+	if (!of_property_read_u32(np, "phy-dll-delay-strobe", &tmp)) {
+		ret = sdhci_cdns_write_phy_reg(priv,
+					       SDHCI_CDNS_PHY_DLY_STROBE, tmp);
+		if (ret)
+			return ret;
+	}
+	return 0;
 }
 
 static inline void *sdhci_cdns_priv(struct sdhci_host *host)
@@ -224,10 +288,11 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
 	struct sdhci_host *host;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_cdns_priv *priv;
+	struct device *dev = &pdev->dev;
 	struct clk *clk;
 	int ret;
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
@@ -253,7 +318,9 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
 	if (ret)
 		goto free;
 
-	sdhci_cdns_phy_init(priv);
+	ret = sdhci_cdns_phy_parse_dt(dev->of_node, priv);
+	if (ret)
+		goto free;
 
 	ret = sdhci_add_host(host);
 	if (ret)
-- 
2.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux