The current code assumes that DMA is finished before SD access end is flagged. Thus, it schedules the 'dma_complete' tasklet in the SD card interrupt routine when DATAEND is set. The assumption is not safe, though. Even by mounting an SD card, it can be seen that sometimes DMA complete is first, sometimes DATAEND. It seems they are usually close enough timewise to not cause problems. However, a customer reported that with CMD53 sometimes things really break apart. As a result, the BSP has a patch which introduces flags for both events and makes sure both flags are set before scheduling the tasklet. The customer accepted the patch, yet it doesn't seem a proper upstream solution to me. This patch refactors the code to replace the tasklet with already existing and more lightweight mechanisms. First of all, we set the callback in a DMA descriptor to automatically get notified when DMA is done. In the callback, we then use a completion to make sure the SD access has already ended. Then, we proceed as before. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- I tried various synchronization approaches and liked this one best. There are a couple of reasons this patch is RFC: The #ifdef's need to go but are handy for now. More testing is needed. While it worked fine for me writing terrabytes to different cards (still trying to break the wear-levelling), broader testing with different workloads and use-cases is largely welcome. I specifically couldn't test with CMD53 (SDIO) which originally caused the problem for the customer because that seems not working with my Gen2 board. I tried to fix SDIO on Gen2 as a side-task but didn't find anything obvious on a glimpse. SDIO works with my Gen3 boards but for that we don't have DMA upstream yet. Upstreaming Gen3 DMA will need some bigger DMA refactoring, so it might be worth waiting until the refactoring is done. In a nutshell, there are dependency issues currently. So, calling for early review here. And opinions how to proceed. I am not sure we want this in renesas-drivers until the SDIO functionality has been verified? Because it is the reason this patch exists in the first place :) The branch is here: git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/topic/sdhi-dma-sync The test description is here: http://elinux.org/Tests:SDHI-DMA-Sync Cheers and thanks, Wolfram drivers/mmc/host/tmio_mmc.h | 2 +- drivers/mmc/host/tmio_mmc_dma.c | 71 +++++++++++++++++++++++++++-------------- drivers/mmc/host/tmio_mmc_pio.c | 4 +-- 3 files changed, 50 insertions(+), 27 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 2b349d48fb9a8a..891d400d2a7cf2 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -137,7 +137,7 @@ struct tmio_mmc_host { bool force_pio; struct dma_chan *chan_rx; struct dma_chan *chan_tx; - struct tasklet_struct dma_complete; + struct completion dma_dataend; struct tasklet_struct dma_issue; struct scatterlist bounce_sg; u8 *bounce_buf; diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index fa8a936a3d9ba1..d2b6aed644f361 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -43,6 +44,43 @@ void tmio_mmc_abort_dma(struct tmio_mmc_host *host) tmio_mmc_enable_dma(host, true); } +static void tmio_mmc_dma_callback(void *arg) +{ + struct tmio_mmc_host *host = arg; + +#ifdef DEBUG + u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); + + dev_dbg(&host->pdev->dev, "DMA complete (0x%08x)\n", status); +#endif + + wait_for_completion(&host->dma_dataend); + +#ifdef DEBUG + status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); + + dev_dbg(&host->pdev->dev, "DATAEND complete (0x%08x)\n", status); +#endif + + spin_lock_irq(&host->lock); + + if (!host->data) + goto out; + + if (host->data->flags & MMC_DATA_READ) + dma_unmap_sg(host->chan_rx->device->dev, + host->sg_ptr, host->sg_len, + DMA_FROM_DEVICE); + else + dma_unmap_sg(host->chan_tx->device->dev, + host->sg_ptr, host->sg_len, + DMA_TO_DEVICE); + + tmio_mmc_do_data_irq(host); +out: + spin_unlock_irq(&host->lock); +} + static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) { struct scatterlist *sg = host->sg_ptr, *sg_tmp; @@ -88,6 +126,10 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) DMA_DEV_TO_MEM, DMA_CTRL_ACK); if (desc) { + reinit_completion(&host->dma_dataend); + desc->callback = tmio_mmc_dma_callback; + desc->callback_param = host; + cookie = dmaengine_submit(desc); if (cookie < 0) { desc = NULL; @@ -162,6 +204,10 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) DMA_MEM_TO_DEV, DMA_CTRL_ACK); if (desc) { + reinit_completion(&host->dma_dataend); + desc->callback = tmio_mmc_dma_callback; + desc->callback_param = host; + cookie = dmaengine_submit(desc); if (cookie < 0) { desc = NULL; @@ -221,29 +267,6 @@ static void tmio_mmc_issue_tasklet_fn(unsigned long priv) dma_async_issue_pending(chan); } -static void tmio_mmc_tasklet_fn(unsigned long arg) -{ - struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; - - spin_lock_irq(&host->lock); - - if (!host->data) - goto out; - - if (host->data->flags & MMC_DATA_READ) - dma_unmap_sg(host->chan_rx->device->dev, - host->sg_ptr, host->sg_len, - DMA_FROM_DEVICE); - else - dma_unmap_sg(host->chan_tx->device->dev, - host->sg_ptr, host->sg_len, - DMA_TO_DEVICE); - - tmio_mmc_do_data_irq(host); -out: - spin_unlock_irq(&host->lock); -} - void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) { /* We can only either use DMA for both Tx and Rx or not use it at all */ @@ -306,7 +329,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat if (!host->bounce_buf) goto ebouncebuf; - tasklet_init(&host->dma_complete, tmio_mmc_tasklet_fn, (unsigned long)host); + init_completion(&host->dma_dataend); tasklet_init(&host->dma_issue, tmio_mmc_issue_tasklet_fn, (unsigned long)host); } diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 6b789a739d4dfe..c41f2252945eb7 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -596,11 +596,11 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat) if (done) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); - tasklet_schedule(&host->dma_complete); + complete(&host->dma_dataend); } } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); - tasklet_schedule(&host->dma_complete); + complete(&host->dma_dataend); } else { tmio_mmc_do_data_irq(host); tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
