Le 2017-01-31 14:09, Linus Walleij a écrit :
On Tue, Jan 31, 2017 at 11:31 AM, Paul Cercueil <paul@xxxxxxxxxxxxxxx>
wrote:
[Rob]:
From the overlapping register addresses in the examples and this
description, it looks like the pinctrlr and gpio controller are 1
block.
If so, then there should only be 1 node.
Well, that's what I had until Linus W. just told me to do the
opposite:
Just pull all these down two levels and make them one device
each instead of having them inside the pin controller node
like this.
I guess the argument is that they are in the same coherent memory
range so they should be one device node. That is how we handle
e.g. system controllers so it makes some sense.
So can the two GPIO controllers be modeled as two subnodes of
the pin controller then?
Subnodes are certainly OK, we have that for many other devices
such as interrupt controllers on PCI bridges and what not.
So when the probing of the pin controller is ready it can just
walk down and populate the GPIO subdevices with
of_platform_default_populate() or simply by registering the
device directly with platform_device_add_data() just like an
MFD device does?
This is nice because we want to use the standard gpio ranges
to map pins to GPIO lines.
I'm sorry about the unclarities here, but it's essentially an intrinsic
problem with GPIO that has been with us for years: do we model
each "bank" as a device or do we just register each bank as a
gpiochip, or do we even make one gpiochip to cover all the banks.
All solutions can be found in the kernel... also the different DT
bindings:
one node for a whole slew of GPIO controllers, or seveal nodes
and I bet also several nodes for memory ranges in close proximity.
I don't know for sure what is the most elegant solution, we might
need to build some consensus here for the future so it doesn't
get to heterogeneous.
Yours,
Linus Walleij
I was thinking that instead of having one pinctrl-ingenic instance
covering
0x600 of register space, and 6 instances of gpio-ingenic having 0x100
each,
I could just have 6 instances of pinctrl-ingenic, each one with an
instance
of gpio-ingenic declared as a sub-node, each handling just 0x100 of
memory space.
Then I can make pinctrl-ingenic and gpio-ingenic share a regmap (through
syscon),
which would be a good idea anyway since the two drivers poke to the very
same
registers (in theory not at the same time, but it's never safe to assume
things
like this).
Problem is, that in that case the pin functions/groups (and
ingenic,pull-ups)
would have to be in DTS because we would have 6 instances with different
pin
groups, and I know you hate that.
Thoughts?
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
