Hi,
On Wednesday, January 25, 2017 07:52:05 PM Paul Cercueil wrote:
> Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
> the pins being properly configured before the driver probes.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
> drivers/video/fbdev/jz4740_fb.c | 104 ++--------------------------------------
> 1 file changed, 3 insertions(+), 101 deletions(-)
>
> v2: No changes
> v3: No changes
>
> diff --git a/drivers/video/fbdev/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c
> index 87790e9644d0..b57df83fdbd3 100644
> --- a/drivers/video/fbdev/jz4740_fb.c
> +++ b/drivers/video/fbdev/jz4740_fb.c
> @@ -17,6 +17,7 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/platform_device.h>
> +#include <linux/pinctrl/consumer.h>
>
> #include <linux/clk.h>
> #include <linux/delay.h>
> @@ -27,7 +28,6 @@
> #include <linux/dma-mapping.h>
>
> #include <asm/mach-jz4740/jz4740_fb.h>
> -#include <asm/mach-jz4740/gpio.h>
>
> #define JZ_REG_LCD_CFG 0x00
> #define JZ_REG_LCD_VSYNC 0x04
> @@ -146,93 +146,6 @@ static const struct fb_fix_screeninfo jzfb_fix = {
> .accel = FB_ACCEL_NONE,
> };
>
> -static const struct jz_gpio_bulk_request jz_lcd_ctrl_pins[] = {
> - JZ_GPIO_BULK_PIN(LCD_PCLK),
> - JZ_GPIO_BULK_PIN(LCD_HSYNC),
> - JZ_GPIO_BULK_PIN(LCD_VSYNC),
> - JZ_GPIO_BULK_PIN(LCD_DE),
> - JZ_GPIO_BULK_PIN(LCD_PS),
> - JZ_GPIO_BULK_PIN(LCD_REV),
> - JZ_GPIO_BULK_PIN(LCD_CLS),
> - JZ_GPIO_BULK_PIN(LCD_SPL),
> -};
> -
> -static const struct jz_gpio_bulk_request jz_lcd_data_pins[] = {
> - JZ_GPIO_BULK_PIN(LCD_DATA0),
> - JZ_GPIO_BULK_PIN(LCD_DATA1),
> - JZ_GPIO_BULK_PIN(LCD_DATA2),
> - JZ_GPIO_BULK_PIN(LCD_DATA3),
> - JZ_GPIO_BULK_PIN(LCD_DATA4),
> - JZ_GPIO_BULK_PIN(LCD_DATA5),
> - JZ_GPIO_BULK_PIN(LCD_DATA6),
> - JZ_GPIO_BULK_PIN(LCD_DATA7),
> - JZ_GPIO_BULK_PIN(LCD_DATA8),
> - JZ_GPIO_BULK_PIN(LCD_DATA9),
> - JZ_GPIO_BULK_PIN(LCD_DATA10),
> - JZ_GPIO_BULK_PIN(LCD_DATA11),
> - JZ_GPIO_BULK_PIN(LCD_DATA12),
> - JZ_GPIO_BULK_PIN(LCD_DATA13),
> - JZ_GPIO_BULK_PIN(LCD_DATA14),
> - JZ_GPIO_BULK_PIN(LCD_DATA15),
> - JZ_GPIO_BULK_PIN(LCD_DATA16),
> - JZ_GPIO_BULK_PIN(LCD_DATA17),
> -};
> -
> -static unsigned int jzfb_num_ctrl_pins(struct jzfb *jzfb)
> -{
> - unsigned int num;
> -
> - switch (jzfb->pdata->lcd_type) {
> - case JZ_LCD_TYPE_GENERIC_16_BIT:
> - num = 4;
> - break;
> - case JZ_LCD_TYPE_GENERIC_18_BIT:
> - num = 4;
> - break;
> - case JZ_LCD_TYPE_8BIT_SERIAL:
> - num = 3;
> - break;
> - case JZ_LCD_TYPE_SPECIAL_TFT_1:
> - case JZ_LCD_TYPE_SPECIAL_TFT_2:
> - case JZ_LCD_TYPE_SPECIAL_TFT_3:
> - num = 8;
> - break;
> - default:
> - num = 0;
> - break;
> - }
> - return num;
> -}
> -
> -static unsigned int jzfb_num_data_pins(struct jzfb *jzfb)
> -{
> - unsigned int num;
> -
> - switch (jzfb->pdata->lcd_type) {
> - case JZ_LCD_TYPE_GENERIC_16_BIT:
> - num = 16;
> - break;
> - case JZ_LCD_TYPE_GENERIC_18_BIT:
> - num = 18;
> - break;
> - case JZ_LCD_TYPE_8BIT_SERIAL:
> - num = 8;
> - break;
> - case JZ_LCD_TYPE_SPECIAL_TFT_1:
> - case JZ_LCD_TYPE_SPECIAL_TFT_2:
> - case JZ_LCD_TYPE_SPECIAL_TFT_3:
> - if (jzfb->pdata->bpp == 18)
> - num = 18;
> - else
> - num = 16;
> - break;
> - default:
> - num = 0;
> - break;
> - }
> - return num;
> -}
> -
> /* Based on CNVT_TOHW macro from skeletonfb.c */
> static inline uint32_t jzfb_convert_color_to_hw(unsigned val,
> struct fb_bitfield *bf)
> @@ -487,8 +400,7 @@ static void jzfb_enable(struct jzfb *jzfb)
>
> clk_prepare_enable(jzfb->ldclk);
>
> - jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
> - jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
> + pinctrl_pm_select_default_state(&jzfb->pdev->dev);
>
> writel(0, jzfb->base + JZ_REG_LCD_STATE);
>
> @@ -511,8 +423,7 @@ static void jzfb_disable(struct jzfb *jzfb)
> ctrl = readl(jzfb->base + JZ_REG_LCD_STATE);
> } while (!(ctrl & JZ_LCD_STATE_DISABLED));
>
> - jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
> - jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
> + pinctrl_pm_select_sleep_state(&jzfb->pdev->dev);
>
> clk_disable_unprepare(jzfb->ldclk);
> }
> @@ -701,9 +612,6 @@ static int jzfb_probe(struct platform_device *pdev)
> fb->mode = NULL;
> jzfb_set_par(fb);
>
> - jz_gpio_bulk_request(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
> - jz_gpio_bulk_request(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
> -
> ret = register_framebuffer(fb);
> if (ret) {
> dev_err(&pdev->dev, "Failed to register framebuffer: %d\n", ret);
> @@ -715,9 +623,6 @@ static int jzfb_probe(struct platform_device *pdev)
> return 0;
>
> err_free_devmem:
> - jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
> - jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
> -
> fb_dealloc_cmap(&fb->cmap);
> jzfb_free_devmem(jzfb);
> err_framebuffer_release:
> @@ -731,9 +636,6 @@ static int jzfb_remove(struct platform_device *pdev)
>
> jzfb_blank(FB_BLANK_POWERDOWN, jzfb->fb);
>
> - jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
> - jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
> -
> fb_dealloc_cmap(&jzfb->fb->cmap);
> jzfb_free_devmem(jzfb);
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
