[PATCH v3 02/14] Documentation: dt/bindings: Document pinctrl-gpio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit adds documentation for the devicetree bidings of the
pinctrl-gpio driver, which handles GPIOs of the Ingenic SoCs
currently supported by the Linux kernel.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/gpio/ingenic,gpio.txt      | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/ingenic,gpio.txt

v2: New patch
v3: No changes

diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
new file mode 100644
index 000000000000..b2eb20494365
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
@@ -0,0 +1,45 @@
+Ingenic jz47xx GPIO controller
+
+Required properties:
+  - compatible:
+    - "ingenic,jz4740-gpio" for the JZ4740 SoC
+    - "ingenic,jz4780-gpio" for the JZ4780 SoC
+
+  - reg: Base address and length of each memory resource used by the GPIO
+    controller hardware module.
+
+  - gpio-controller: Marks the device node as a GPIO controller.
+  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+  - gpio-ranges: Range of pins managed by the GPIO controller.
+
+Optional properties:
+  - base: The GPIO number to use as the base for this driver.
+  - interrupt-controller: Marks the device node as an interrupt controller.
+  - interrupts: Interrupt specifier for the controllers interrupt.
+    Required if 'interrupt-controller' is specified.
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+The GPIO controller also acts as an interrupt controller. It uses the default
+two cells specifier as described in Documentation/devicetree/bindings/
+interrupt-controller/interrupts.txt.
+
+Example:
+
+gpa: gpio-controller@10010000 {
+	compatible = "ingenic,jz4740-gpio";
+	reg = <0x10010000 0x100>;
+
+	gpio-controller;
+	gpio-ranges = <&pinctrl 0 0 32>;
+	#gpio-cells = <2>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <28>;
+};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux