This commit adds documentation for the devicetree bidings of the
pinctrl-ingenic driver, which handles pin configuration and pin
muxing of the Ingenic SoCs currently supported by the Linux kernel.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
.../bindings/pinctrl/ingenic,pinctrl.txt | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
v2: Rewrote the documentation for the new pinctrl-ingenic driver
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
new file mode 100644
index 000000000000..ead5b01ad471
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -0,0 +1,77 @@
+Ingenic jz47xx pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may
+be used as GPIOs, multiplexed device functions are configured within the
+GPIO port configuration registers and it is typical to refer to pins using the
+naming scheme "PxN" where x is a character identifying the GPIO port with
+which the pin is associated and N is an integer from 0 to 31 identifying the
+pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
+PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to
+PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a
+total of 192 pins.
+
+
+Pin controller node
+===================
+
+Required properties:
+- compatible: One of:
+ - "ingenic,jz4740-pinctrl"
+ - "ingenic,jz4780-pinctrl"
+
+Optional properties:
+- ingenic,pull-ups: A list of 32-bit bit fields, where each bit set tells the
+ driver that a pull-up resistor is available for this pin.
+ By default, the driver considers that all pins feature a pull-up resistor.
+- ingenic,pull-downs: A list of 32-bit bit fields, where each bit set tells
+ the driver that a pull-down resistor is available for this pin.
+ By default, the driver considers that all pins feature a pull-down
+ resistor.
+
+
+'functions' sub-node
+====================
+
+The 'functions' node will contain sub-nodes that correspond to pin function
+nodes, and no properties. Pin function nodes will contain sub-nodes that
+correspond to pin groups, and no properties.
+
+The names of the pin function nodes will end up being the available functions
+provided by the pinctrl driver.
+The names of the pin group nodes will end up being the available groups
+provided by the pinctrl driver.
+
+Required properties for pin groups:
+- ingenic,pins: <pin mode [pin mode ...]>;
+ where 'pin' is the number of the pin, and 'mode' is the function mode of the
+ pin that should be enabled for this group.
+
+
+Example:
+=======
+
+pinctrl: ingenic-pinctrl@10010000 {
+ compatible = "ingenic,jz4740-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ ingenic,pull-ups = <0xffffffff 0xffffffff 0xffffffff 0xdfffffff>;
+ ingenic,pull-downs = <0x00000000 0x00000000 0x00000000 0x00000000>;
+
+ functions {
+ mmc {
+ mmc-1bit {
+ /* CLK, CMD, D0 */
+ ingenic,pins = <0x69 0 0x68 0 0x6a 0>;
+ };
+
+ mmc-4bit {
+ /* D1, D2, D3 */
+ ingenic,pins = <0x6b 0 0x6c 0 0x6d 0>;
+ };
+ };
+ };
+};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
