Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[...]

>  struct msdc_delay_phase {
> @@ -331,6 +339,9 @@ struct msdc_host {
>         unsigned char timing;
>         bool vqmmc_enabled;
>         u32 hs400_ds_delay;
> +       u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
> +       u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
> +       u32 hs400_cmd_resp_sel;  /* cmd response sample selection for HS400 */

When you converted the DT binding, this should become bool instead.

>         bool hs400_mode;        /* current eMMC will run at hs400 mode */
>         struct msdc_save_para save_para; /* used when gate HCLK */
>         struct msdc_tune_para def_tune_para; /* default tune setting */

[...]

> +static void msdc_of_property_parse(struct platform_device *pdev,
> +                                  struct msdc_host *host)
> +{
> +       if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
> +                                 &host->hs400_ds_delay))
> +               dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
> +                       host->hs400_ds_delay);

Writing a dev_dbg for each parsed DT property, seems a bit silly. Can
you please remove that.

> +
> +       if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs200-cmd-int-delay",
> +                                 &host->hs200_cmd_int_delay))
> +               dev_dbg(&pdev->dev, "host->hs200-cmd-int-delay: %x\n",
> +                       host->hs200_cmd_int_delay);
> +
> +       if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs400-cmd-int-delay",
> +                                 &host->hs400_cmd_int_delay))
> +               dev_dbg(&pdev->dev, "host->hs400-cmd-int-delay: %x\n",
> +                       host->hs400_cmd_int_delay);
> +
> +       if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs400-cmd-resp-sel",
> +                                 &host->hs400_cmd_resp_sel))
> +               dev_dbg(&pdev->dev, "host->hs200_cmd-resp-sel: %x\n",
> +                       host->hs400_cmd_resp_sel);
> +}
> +
>  static int msdc_drv_probe(struct platform_device *pdev)
>  {
>         struct mmc_host *mmc;
> @@ -1497,7 +1635,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
>         ret = mmc_of_parse(mmc);
>         if (ret)
>                 goto host_free;
> -

Whitespace.

>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>         host->base = devm_ioremap_resource(&pdev->dev, res);
>         if (IS_ERR(host->base)) {
> @@ -1548,10 +1685,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
>                 goto host_free;
>         }
>
> -       if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
> -                                 &host->hs400_ds_delay))
> -               dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
> -                       host->hs400_ds_delay);
> +       msdc_of_property_parse(pdev, host);
>
>         host->dev = &pdev->dev;
>         host->mmc = mmc;
> @@ -1663,6 +1797,7 @@ static void msdc_save_reg(struct msdc_host *host)
>         host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
>         host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
>         host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
> +       host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
>         host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
>  }
>
> @@ -1675,6 +1810,7 @@ static void msdc_restore_reg(struct msdc_host *host)
>         writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
>         writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
>         writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
> +       writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
>         writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
>  }
>
> --
> 1.7.9.5
>

Please also fold in the change suggested/reported by the kbuild test robot.

Besides the minor things, this looks good to me!

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux