Before enabling SDIO irqs, clear the status bit, so we discard old and
stale interrupts. Needed to get two wireless cards working. Use the
newly introduced macro in all places.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Change since RFC: use #define for SETBITS_MASK
drivers/mmc/host/tmio_mmc.h | 2 ++
drivers/mmc/host/tmio_mmc_pio.c | 13 +++++++++++--
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 931d67a059adf0..efe6e6ae9d3d71 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -90,6 +90,8 @@
#define TMIO_SDIO_STAT_EXWT 0x8000
#define TMIO_SDIO_MASK_ALL 0xc007
+#define TMIO_SDIO_SETBITS_MASK 0x0006
+
/* Define some IRQ masks */
/* This is the mask used at reset by the chip */
#define TMIO_MASK_ALL 0x837f031d
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index f21e6a1b1a9206..cb3c4103de156b 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -180,12 +180,21 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
struct tmio_mmc_host *host = mmc_priv(mmc);
if (enable && !host->sdio_irq_enabled) {
+ u16 sdio_status;
+
/* Keep device active while SDIO irq is enabled */
pm_runtime_get_sync(mmc_dev(mmc));
- host->sdio_irq_enabled = true;
+ host->sdio_irq_enabled = true;
host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
~TMIO_SDIO_STAT_IOIRQ;
+
+ /* Clear obsolete interrupts before enabling */
+ sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) & ~TMIO_SDIO_MASK_ALL;
+ if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
+ sdio_status |= TMIO_SDIO_SETBITS_MASK;
+ sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
+
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
} else if (!enable && host->sdio_irq_enabled) {
host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
@@ -771,7 +780,7 @@ static void __tmio_mmc_sdio_irq(struct tmio_mmc_host *host)
sdio_status = status & ~TMIO_SDIO_MASK_ALL;
if (pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
- sdio_status |= 6;
+ sdio_status |= TMIO_SDIO_SETBITS_MASK;
sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
