On 10/01/17 09:00, Ritesh Harjani wrote:
> From: Venkat Gopalakrishnan <venkatg@xxxxxxxxxxxxxx>
>
> The vendor specific func register doesn't get reset when using the
> software reset register. The various bootloader's could leave this
> in an unknown state, hence reset this register to it's power on reset
> value during probe.
>
> Signed-off-by: Venkat Gopalakrishnan <venkatg@xxxxxxxxxxxxxx>
> Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-msm.c | 15 ++++-----------
> 1 file changed, 4 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 5a37c29..a028568 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -69,6 +69,7 @@
> #define CORE_DLL_CLOCK_DISABLE BIT(21)
>
> #define CORE_VENDOR_SPEC 0x10c
> +#define CORE_VENDOR_SPEC_POR_VAL 0xa1c
> #define CORE_CLK_PWRSAVE BIT(1)
> #define CORE_HC_MCLK_SEL_DFLT (2 << 8)
> #define CORE_HC_MCLK_SEL_HS400 (3 << 8)
> @@ -1197,17 +1198,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> goto clk_disable;
> }
>
> - config = readl_relaxed(msm_host->core_mem + CORE_POWER);
> - config |= CORE_SW_RST;
> - writel_relaxed(config, msm_host->core_mem + CORE_POWER);
> -
> - /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
> - usleep_range(1000, 5000);
> - if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
> - dev_err(&pdev->dev, "Stuck in reset\n");
> - ret = -ETIMEDOUT;
> - goto clk_disable;
> - }
> + /* Reset the vendor spec register to power on reset state */
> + writel_relaxed(CORE_VENDOR_SPEC_POR_VAL,
> + host->ioaddr + CORE_VENDOR_SPEC);
>
> /* Set HC_MODE_EN bit in HC_MODE register */
> writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
