+ Haibo, Gary, Fabio, Shawn Gou
On 6 January 2017 at 16:56, Clemens Gruber <clemens.gruber@xxxxxxxxxxxx> wrote:
> On Fri, Jan 06, 2017 at 10:33:49AM +0800, Shawn Lin wrote:
>> On 2017/1/6 8:41, Clemens Gruber wrote:
>> > Hi,
>> >
>> > with the current mainline 4.10-rc2 kernel, I can no longer boot from
>> > the eMMC on my i.MX6Q board.
>> >
>> > Details:
>> > The eMMC is a Micron MTFC4GACAJCN-1M WT but as the i.MX6Q only supports
>> > eMMC 4.41 features and we did not implement voltage switching from 3.3V
>> > to 1.8V or lower, I did add no-1-8-v; (but none of the mmc-ddr or mmc-hs
>> > options) to the device tree. The bus-width is 8.
>> >
>> > With 4.9 the board booted fine, now with the current mainline 4.10 tree,
>> > I get the following (repeating) errors at boot:
>> >
>> > [ 4.326834] Waiting for root device /dev/mmcblk0p2...
>> > [ 14.563861] mmc0: Timeout waiting for hardware cmd interrupt.
>> > [ 14.569619] sdhci: =========== REGISTER DUMP (mmc0)===========
>> > [ 14.575461] sdhci: Sys addr: 0x4e726000 | Version: 0x00000002
>> > [ 14.581300] sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
>> > [ 14.587140] sdhci: Argument: 0x00010000 | Trn mode: 0x00000013
>> > [ 14.592979] sdhci: Present: 0x01fd8009 | Host ctl: 0x00000031
>> > [ 14.598816] sdhci: Power: 0x00000002 | Blk gap: 0x00000080
>> > [ 14.604654] sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f
>> > [ 14.610493] sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
>> > [ 14.616332] sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
>> > [ 14.622168] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
>> > [ 14.628007] sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a007
>> > [ 14.633845] sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
>>
>> it shows you always fail to get resp of sending status within the
>> expected period of time.
>>
>>
>> > [ 14.639682] sdhci: Host ctl2: 0x00000000
>> > [ 14.643611] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x4e6f7208
>> > [ 14.649447] sdhci: ===========================================
>> >
>> > This repeats a few times, then more information is shown at the bottom:
>> >
>> > [ 86.893859] mmc0: Timeout waiting for hardware cmd interrupt.
>> > [ 86.899615] sdhci: =========== REGISTER DUMP (mmc0)===========
>> > [ 86.905453] sdhci: Sys addr: 0x00000000 | Version: 0x00000002
>> > [ 86.911291] sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
>> > [ 86.917129] sdhci: Argument: 0x00010000 | Trn mode: 0x00000013
>> > [ 86.922967] sdhci: Present: 0x01fd8009 | Host ctl: 0x00000031
>> > [ 86.928804] sdhci: Power: 0x00000002 | Blk gap: 0x00000080
>> > [ 86.934642] sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f
>> > [ 86.940479] sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
>> > [ 86.946316] sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
>> > [ 86.952154] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
>> > [ 86.957992] sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a007
>> > [ 86.963830] sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
>> > [ 86.969668] sdhci: Host ctl2: 0x00000000
>> > [ 86.973596] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
>> > [ 86.979433] sdhci: ===========================================
>> > [ 86.986356] mmc0: switch to bus width 8 ddr failed
>> > [ 86.991163] mmc0: error -110 whilst initialising MMC card
>> > [ 97.773859] mmc0: Timeout waiting for hardware cmd interrupt.
>> >
>> > --
>> >
>> > After looking through the latest commits to mmc/core, I found the
>> > culprit:
>> > Commit e173f8911f091fa50ccf8cc1fa316dd5569bc470 ("mmc: core: Update
>> > CMD13 polling policy when switch to HS DDR mode")
>> >
>> > Reverting it fixes the problem. But I am unsure if that's the right
>> > course of action?
>> >
>> > Feel free to send me patches for testing!
>>
>> By looking the changes itself, it should be good from the view of spec.
>> Maybe you could try the patch below, but don't beat me if that doesn't
>> help at all. :)
>>
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -1074,7 +1074,7 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
>> EXT_CSD_BUS_WIDTH,
>> ext_csd_bits,
>> card->ext_csd.generic_cmd6_time,
>> - MMC_TIMING_MMC_DDR52,
>> + 0,
>> true, true, true);
>> if (err) {
>> pr_err("%s: switch to bus width %d ddr failed\n",
>> @@ -1118,6 +1118,9 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
>> if (err)
>> err = __mmc_set_signal_voltage(host,
>> MMC_SIGNAL_VOLTAGE_330);
>>
>> + if (!err)
>> + mmc_set_timing(host, MMC_TIMING_MMC_DDR52);
>> +
>>
>>
>
> Hi,
>
> thank you. This patch solves the problem! :)
>
> Tested-by: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx>
>
> Regards,
> Clemens
Everybody involved, thanks for looking into this!
I think the above approach seems like a reasonable fix for the 4.10
rcs. Shawn Lin, would you mind re-posting a proper patch with a
change-log?
In the meantime, I will follow the process of Haibo Chen's debugging
around the voltage switch issue and look into what Dong's suggesting
around this may be.
Just to be clear, I would definitely prefer a fix in the sdhci driver,
if that can be done. So I will give Haibo/Dong etc a couple of more
days to investigate, before applying Shawn Lin's fix for the core.
Hope that approach is okay with all of you?
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
