According to the code the intention is to append 8 SCK cycles
instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this
will never happened because it's an AC command not an ADTC command.
So fix this by moving the statement into the right function.
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
---
drivers/mmc/host/mxs-mmc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 44ecebd..c8b8ac6 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -309,6 +309,9 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
cmd0 = BF_SSP(cmd->opcode, CMD0_CMD);
cmd1 = cmd->arg;
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
+
if (host->sdio_irq_en) {
ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
@@ -417,8 +420,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
ssp->base + HW_SSP_BLOCK_SIZE);
}
- if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
- (cmd->opcode == SD_IO_RW_EXTENDED))
+ if (cmd->opcode == SD_IO_RW_EXTENDED)
cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
cmd1 = cmd->arg;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
