When card is polling (broken-cd), there is a spamming messge related to
clock.
After applied this patch, display the message only one time at boot
time. It's enough to check which clock values is used.
Also prevent to display the spamming message.
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 13 ++++++++++++-
drivers/mmc/host/dw_mmc.h | 1 +
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index d508225..dd7e95d 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1176,13 +1176,24 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
- if (clock != slot->__clk_old || force_clkinit)
+ if ((clock != slot->__clk_old &&
+ !test_bit(DW_MMC_CARD_NEEDS_POLL, &slot->flags)) ||
+ force_clkinit) {
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
slot->id, host->bus_hz, clock,
div ? ((host->bus_hz / div) >> 1) :
host->bus_hz, div);
+ /*
+ * If card is polling, display the message only
+ * one time at boot time.
+ */
+ if (slot->mmc->caps & MMC_CAP_NEEDS_POLL &&
+ slot->mmc->f_min == clock)
+ set_bit(DW_MMC_CARD_NEEDS_POLL, &slot->flags);
+ }
+
/* disable clock */
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 4a6ae750..c594658 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -272,6 +272,7 @@ struct dw_mci_slot {
#define DW_MMC_CARD_NEED_INIT 1
#define DW_MMC_CARD_NO_LOW_PWR 2
#define DW_MMC_CARD_NO_USE_HOLD 3
+#define DW_MMC_CARD_NEEDS_POLL 4
int id;
int sdio_id;
};
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
