On 22/11/16 01:04, Zach Brown wrote:
> On NI 9037 boards the max SDIO frequency is limited by trace lengths
> and other layout choices. The max SDIO frequency is stored in an ACPI
> table.
>
> The driver reads the ACPI entry MXFQ during sdio_probe_slot and sets the
> f_max field of the host.
>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx>
> Reviewed-by: Jaeden Amero <jaeden.amero@xxxxxx>
> Reviewed-by: Josh Cartwright <joshc@xxxxxx>
> Signed-off-by: Zach Brown <zach.brown@xxxxxx>
> ---
> drivers/mmc/host/sdhci-pci-core.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 9741505..a855c97 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -27,6 +27,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/mmc/slot-gpio.h>
> #include <linux/mmc/sdhci-pci-data.h>
> +#include <linux/acpi.h>
>
> #include "sdhci.h"
> #include "sdhci-pci.h"
> @@ -377,6 +378,20 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
>
> static int ni_byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
> {
> +#ifdef CONFIG_ACPI
> + acpi_status status;
> + unsigned long long max_freq;
> +
> + status = acpi_evaluate_integer(ACPI_HANDLE(&slot->chip->pdev->dev),
> + "MXFQ", NULL, &max_freq);
> + if (ACPI_FAILURE(status)) {
> + dev_info(&slot->chip->pdev->dev,
Doesn't it error out the whole probe. So it should be dev_err()
> + "MXFQ not found in acpi table\n");
> + return -EINVAL;
> + }
> +
> + slot->host->mmc->f_max = max_freq * 1000000;
> +#endif
> slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
> MMC_CAP_WAIT_WHILE_BUSY;
> return 0;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
