> -----Original Message----- > From: Michael Walle [mailto:michael@xxxxxxxx] > Sent: Monday, November 14, 2016 11:12 PM > To: linux-kernel@xxxxxxxxxxxxxxx > Cc: linux-mmc@xxxxxxxxxxxxxxx; Ulf Hansson; Adrian Hunter; yangbo lu; > Michael Walle > Subject: [PATCH v3] mmc: sdhci-of-esdhc: fixup PRESENT_STATE read > > Since commit 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy > cards in __mmc_switch()") the ESDHC driver is broken: > mmc0: Card stuck in programming state! __mmc_switch > mmc0: error -110 whilst initialising MMC card > > Since this commit __mmc_switch() uses ->card_busy(), which is > sdhci_card_busy() for the esdhc driver. sdhci_card_busy() uses the > PRESENT_STATE register, specifically the DAT0 signal level bit. But the > ESDHC uses a non-conformant PRESENT_STATE register, thus a read fixup is > required to make the driver work again. > > Signed-off-by: Michael Walle <michael@xxxxxxxx> > Fixes: 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy cards in > __mmc_switch()") > --- > v3: > - explain the bits in the comments > - use bits[19:0] from the original value, all other will be taken from > the > fixup value. > > v2: > - use lower bits of the original value (that was actually a typo) > - add fixes tag > - fix typo > > drivers/mmc/host/sdhci-of-esdhc.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci- > of-esdhc.c > index fb71c86..74cf3b1 100644 > --- a/drivers/mmc/host/sdhci-of-esdhc.c > +++ b/drivers/mmc/host/sdhci-of-esdhc.c > @@ -66,6 +66,19 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, > return ret; > } > } > + /* > + * The DAT[3:0] line signal levels and the CMD line signal level > are > + * not compatible with standard SDHC register. The line signal > levels > + * DAT[7:0] are at bits 31:24 and the line signal level is at bit > 23. > + * All other bits are the same as in the standard SDHC register. > + */ > + if (spec_reg == SDHCI_PRESENT_STATE) { > + ret = value & 0x000fffff; > + ret |= (value >> 4) & SDHCI_DATA_LVL_MASK; > + ret |= (value << 1) & 0x01000000; > + return ret; > + } > + [Lu Yangbo-B47093] This is the proper fix. Acked-by: Yangbo Lu <yangbo.lu@xxxxxxx> > ret = value; > return ret; > } > -- > 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
