[PATCHv2 09/10] mmc: dw_mmc: The "clock-freq-min-max" property was deprecated

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The "clock-freq-min-max" property was deprecated.
There is "max-frequency" property in drivers/mmc/core/host.c
"max-frequency" can be replaced with "clock-freq-min-max".
Minimum clock value might be set to 100K by default.
Then MMC core should try to find the correct value from 400K to 100K.
So it just needs to set Maximum clock value.

Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 3 ++-
 drivers/mmc/host/dw_mmc.c                                  | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index bfa461a..1279a22 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -59,8 +59,9 @@ Optional properties:
   is specified and the ciu clock is specified then we'll try to set the ciu
   clock to this at probe time.
 
-* clock-freq-min-max: Minimum and Maximum clock frequency for card output
+* clock-freq-min-max (DEPRECATED): Minimum and Maximum clock frequency for card output
   clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
+	  (Use the "max-frequency" instead of "clock-freq-min-max".)
 
 * num-slots: specifies the number of slots supported by the controller.
   The number of physical slots actually used could be equal or less than the
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index ec0ba79..48e968a 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2608,6 +2608,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 		mmc->f_min = DW_MCI_FREQ_MIN;
 		mmc->f_max = DW_MCI_FREQ_MAX;
 	} else {
+		dev_info(host->dev,
+			"'clock-freq-min-max' property was deprecated.\n");
 		mmc->f_min = freq[0];
 		mmc->f_max = freq[1];
 	}
-- 
2.10.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux