Re: [PATCH 09/13] mmc: dw_mmc: remove the "clock-freq-min-max" property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Heiko.

On 11/03/2016 05:20 PM, Heiko Stübner wrote:
> Hi Jaehoon,
> 
> Am Donnerstag, 3. November 2016, 15:21:31 schrieb Jaehoon Chung:
>> Remove the "clock-freq-min-max" property.
>> There is "max-frequency" property in drivers/mmc/core/host.c
>> It can be used for getting maximum frequency.
>>
>> And minimum clock value is assigned to 100K by default.
>> Because MMC core should check the initial clock value from
>> 400K to 100K until finding correct value.
>> It's why Minimum value puts 100K by default.
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt |  3 ---
>>  drivers/mmc/host/dw_mmc.c                                  | 13
>> ++++--------- 2 files changed, 4 insertions(+), 12 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>> b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index
>> 4e00e85..21c8251 100644
>> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>> @@ -56,9 +56,6 @@ Optional properties:
>>    is specified and the ciu clock is specified then we'll try to set the ciu
>> clock to this at probe time.
>>
>> -* clock-freq-min-max: Minimum and Maximum clock frequency for card output
>> -  clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz
>> by default. -
> 
> I'd think devicetree people will protest about simply removing this property 
> without deprecating it first - to be backwards compatible with old devicetrees.
> 
> Especially as this property was added already back in 2013, so has been in use 
> for quite some time.

Thanks for pointing out. I will resend the patchset with changing this.
And maintain the backwards compatible.

Best Regards,
Jaehoon Chung

> 
> 
> Heiko
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux