Re: Regression after "do not use CMD13 to get status after speed mode switch"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 17, 2016 at 4:32 PM, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:

> Before this patch the eMMC is detected and all partitions enumerated
> immediately, but after the patch it doesn't come up at all, except
> sometimes, when it appears minutes (!) after boot, all of a sudden.

FYI this is what it looks like when it eventually happens:
root@msm8660:/ [  627.710175] mmc0: new high speed MMC card at address 0001
[  627.711641] mmcblk0: mmc0:0001 SEM04G 3.69 GiB
[  627.715485] mmcblk0boot0: mmc0:0001 SEM04G partition 1 1.00 MiB
[  627.736654] mmcblk0boot1: mmc0:0001 SEM04G partition 2 1.00 MiB
[  627.747397] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 128 KiB
[  627.756326]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13
p14 p15 p16 p17 p18 p19 p20 p21 >

So after 627 seconds, a bit hard for users to wait this long for their
root filesystem.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux