On 05/10/16 17:40, Ritesh Harjani wrote:
> SDHC MSM controller need 2x clock for MCLK at GCC.
> Hence make required changes to have 2x clock for
> DDR timing modes.
>
> Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-msm.c | 25 ++++++++++++++++++++-----
> 1 file changed, 20 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 9d18cf0..eb1a9e3 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -669,6 +669,7 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + struct mmc_ios curr_ios = host->mmc->ios;
> u32 msm_clock;
> int rc;
>
> @@ -676,15 +677,29 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> goto out;
>
> spin_unlock_irq(&host->lock);
> - if ((clock != msm_host->clk_rate) && msm_host->clk_table) {
> - msm_clock = sdhci_msm_get_msm_clk_rate(host, clock);
> + if (((curr_ios.timing == MMC_TIMING_UHS_DDR50) ||
> + (curr_ios.timing == MMC_TIMING_MMC_DDR52) ||
> + (curr_ios.timing == MMC_TIMING_MMC_HS400)) &&
> + msm_host->clk_table) {
> + /*
> + * The SDHC requires internal clock frequency to be double the
> + * actual clock that will be set for DDR mode. The controller
> + * uses the faster clock(100/400MHz) for some of its parts and
> + * send the actual required clock (50/200MHz) to the card.
> + */
> + clock *= 2;
> + }
> + msm_clock = sdhci_msm_get_msm_clk_rate(host, clock);
> +
> + if ((msm_clock != msm_host->clk_rate) && msm_host->clk_table) {
> rc = clk_set_rate(msm_host->clk, msm_clock);
> if (rc) {
> - pr_err("%s: failed to set clock at rate %u, requested clock rate %u\n",
> - mmc_hostname(host->mmc), msm_clock, clock);
> + pr_err("%s: failed to set clock at rate %u at timing %d\n",
> + mmc_hostname(host->mmc), msm_clock,
> + curr_ios.timing);
> goto out;
> }
> - msm_host->clk_rate = clock;
> + msm_host->clk_rate = msm_clock;
> pr_debug("%s: setting clock at rate %lu\n",
> mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
