RE: MMC timeout issue on 4.6 kernel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

With further debug, I am seeing the issue only with ADMA2, whereas SDMA and PIO mode are working fine.
Can anyone help me on this issue?

Regards
Sai Krishna

> -----Original Message-----
> From: Sai Krishna Potthuri
> Sent: Saturday, October 01, 2016 1:59 PM
> To: 'linux-mmc@xxxxxxxxxxxxxxx' <linux-mmc@xxxxxxxxxxxxxxx>
> Cc: 'Ulf Hansson' <ulf.hansson@xxxxxxxxxx>
> Subject: RE: MMC timeout issue on 4.6 kernel
> 
> Hi,
> 
> Any help
> 
> Regards
> Sai Krishna
> 
> > -----Original Message-----
> > From: Sai Krishna Potthuri
> > Sent: Monday, September 26, 2016 10:29 PM
> > To: linux-mmc@xxxxxxxxxxxxxxx
> > Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > Subject: MMC timeout issue on 4.6 kernel
> >
> > Hi,
> >
> > With 4.6 kernel, I am doing regression test on SD which does following things.
> > 1. Mount SD card.
> > 2. Read and write random 1MB data.
> > 3. Reboot the board.
> >
> > I am facing following error while reading the data from the SD card.
> >
> > mmc0: Timeout waiting for hardware interrupt.
> > mmcblk0: error -110 transferring data, sector 8194, nr 2, cmd response
> > 0x900, card status 0xb00
> > mmc0: tried to reset card
> > mmc0: Timeout waiting for hardware interrupt.
> > mmcblk0: error -110 transferring data, sector 8194, nr 2, cmd response
> > 0x900, card status 0xb00
> > mmcblk0: retrying using single block read
> > mmc0: Timeout waiting for hardware interrupt.
> > mmcblk0: error -110 transferring data, sector 8194, nr 2, cmd response
> > 0x900, card status 0x0
> > blk_update_request: I/O error, dev mmcblk0, sector 8194
> > mmc0: Timeout waiting for hardware interrupt.
> > mmcblk0: error -110 transferring data, sector 8195, nr 1, cmd response
> > 0x900, card status 0x0
> > blk_update_request: I/O error, dev mmcblk0, sector 8195 EXT2-fs
> (mmcblk0p1):
> > error: unable to read superblock
> > mmc0: Timeout waiting for hardware interrupt.
> > mmcblk0: error -110 transferring data, sector 16387, nr 61, cmd
> > response 0x900, card status 0xb00
> > mmc0: tried to reset card
> >
> > Getting this error once in a while in regression test after several runs.
> > I am not seeing this issue with 4.5 kernel.
> > Please let me know if anyone has seen this issue.
> >
> > Regards
> > Sai Krishna
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux