When introducing hs400es, I didn't notice that we haven't
switched voltage to 1V2 or 1V8 for it. That happens to work
as the first controller claiming to support hs400es, arasan(5.1),
which is designed to only support 1V8. So the voltage is fixed to 1V8.
But it actually is wrong, and will not fit for other host controllers.
Let's fix it.
Fixes: commit 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
Cc: <stable@xxxxxxxxxxxxxxx> 4.4#
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
Changes in v2:
- fix copy-paste error, mea culpa
drivers/mmc/core/mmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3486bc7..f4ed5ac 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1263,6 +1263,16 @@ static int mmc_select_hs400es(struct mmc_card *card)
goto out_err;
}
+ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V)
+ err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+
+ if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V)
+ err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+
+ /* If fails try again during next card power cycle */
+ if (err)
+ goto out_err;
+
err = mmc_select_bus_width(card);
if (err < 0)
goto out_err;
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
