Re: [PATCH v3 2/3] mmc: tmio-mmc: add support for 32bit data port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ Lee

On 12 September 2016 at 16:15, Chris Brandt <chris.brandt@xxxxxxxxxxx> wrote:
> For the r7s72100 SOC, the DATA_PORT register was changed to 32-bits wide.
> Therefore a new flag has been created that will allow 32-bit reads/writes
> to the DATA_PORT register instead of 16-bit (because 16-bits accesses are
> not supported).
>
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---
> v3:
> * changed loops to memcpy
> v2:
> * changed 'data * 0xFF' to 'data & 0xFF'
> * added 'const' for sd_ctrl_write32_rep
> ---
>  drivers/mmc/host/tmio_mmc.h     | 12 ++++++++++++
>  drivers/mmc/host/tmio_mmc_pio.c | 30 ++++++++++++++++++++++++++++++
>  include/linux/mfd/tmio.h        |  5 +++++

This header file needs to be split up. The mmc specific bits, should
be moved to a local header file under driver/mmc/host/*.

Sure, we don't need to do that as part of $subject patch, but then I
need an ack from Lee Jones, the mfd maintainer. I have added him on
cc.

>  3 files changed, 47 insertions(+)
>
> diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
> index ecb99fc..a99e634 100644
> --- a/drivers/mmc/host/tmio_mmc.h
> +++ b/drivers/mmc/host/tmio_mmc.h
> @@ -237,6 +237,12 @@ static inline u32 sd_ctrl_read16_and_16_as_32(struct tmio_mmc_host *host, int ad
>                readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
>  }
>
> +static inline void sd_ctrl_read32_rep(struct tmio_mmc_host *host, int addr,
> +               u32 *buf, int count)
> +{
> +       readsl(host->ctl + (addr << host->bus_shift), buf, count);
> +}
> +
>  static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
>  {
>         /* If there is a hook and it returns non-zero then there
> @@ -259,4 +265,10 @@ static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host, int
>         writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
>  }
>
> +static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
> +               const u32 *buf, int count)
> +{
> +       writesl(host->ctl + (addr << host->bus_shift), buf, count);
> +}
> +
>  #endif
> diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
> index 017a4dc..59fac7d 100644
> --- a/drivers/mmc/host/tmio_mmc_pio.c
> +++ b/drivers/mmc/host/tmio_mmc_pio.c
> @@ -443,6 +443,36 @@ static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
>         /*
>          * Transfer the data
>          */
> +       if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) {
> +               u8 data[4] = { };
> +
> +               if (is_read)
> +                       sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
> +                                          count >> 2);
> +               else
> +                       sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
> +                                           count >> 2);
> +
> +               /* if count was multiple of 4 */
> +               if (!(count & 0x3))
> +                       return;
> +
> +               buf8 = (u8 *)(buf + (count >> 2));
> +               count %= 4;
> +
> +               if (is_read) {
> +                       sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT,
> +                                          (u32 *)data, 1);
> +                       memcpy(buf8, data, count);
> +               } else {
> +                       memcpy(data, buf8, count);
> +                       sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT,
> +                                           (u32 *)data, 1);
> +               }
> +
> +               return;
> +       }
> +
>         if (is_read)
>                 sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
>         else
> diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
> index 3b95dc7..0dbcb7e 100644
> --- a/include/linux/mfd/tmio.h
> +++ b/include/linux/mfd/tmio.h
> @@ -100,6 +100,11 @@
>  #define TMIO_MMC_SDIO_STATUS_QUIRK     (1 << 8)
>
>  /*
> + * Some controllers have a 32-bit wide data port register
> + */
> +#define TMIO_MMC_32BIT_DATA_PORT       (1 << 9)
> +
> +/*
>   * Some controllers allows to set SDx actual clock
>   */
>  #define TMIO_MMC_CLK_ACTUAL            (1 << 10)
> --
> 2.9.2
>
>

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux