[PATCH 1/5] mmc: core: don't try to switch block size for dual rate mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ziyuan Xu <xzy.xu@xxxxxxxxxxxxxx>

Per spec, block size should always be 512 bytes for dual rate mode,
so any attempts to switch the block size under dual rate mode should
be neglected.

Signed-off-by: Ziyuan Xu <xzy.xu@xxxxxxxxxxxxxx>
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>

---

 drivers/mmc/core/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f0ed0af..2553d90 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2576,7 +2576,8 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
 	struct mmc_command cmd = {0};
 
-	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
+	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) ||
+	    mmc_card_hs400(card) || mmc_card_hs400es(card))
 		return 0;
 
 	cmd.opcode = MMC_SET_BLOCKLEN;
-- 
2.3.7


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux