Hello.
On 09/19/2016 03:49 PM, Wolfram Sang wrote:
We need to add R1 without CRC support, refactor the bus width routine a
little and extend a quirk check. To support "non-removable;" we need a
workaround which will be hopefully removed when reworking PM soon.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/tmio_mmc.h | 3 +++
drivers/mmc/host/tmio_mmc_pio.c | 38 ++++++++++++++++++++++++++------------
2 files changed, 29 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 4b501f2d529f6e..637581faf756b1 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -79,6 +79,9 @@
#define CLK_CTL_DIV_MASK 0xff
#define CLK_CTL_SCLKEN BIT(8)
+#define CARD_OPT_WIDTH8 BIT(13)
+#define CARD_OPT_WIDTH BIT(15)
+
#define TMIO_BBS 512 /* Boot block size */
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 46b5a456243b84..a0f05eb4f34490 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
[...]
@@ -922,14 +925,16 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host)
static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
unsigned char bus_width)
{
- switch (bus_width) {
- case MMC_BUS_WIDTH_1:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
- break;
- case MMC_BUS_WIDTH_4:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
- break;
- }
+ u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT)
+ & ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8);
+
+ /* reg now applies to MMC_BUS_WIDTH_4 */
+ if (bus_width == MMC_BUS_WIDTH_1)
+ reg |= CARD_OPT_WIDTH;
+ else if (bus_width == MMC_BUS_WIDTH_8)
+ reg |= CARD_OPT_WIDTH8;
Why not *switch*?
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
