On 17 September 2016 at 04:32, Ziyuan Xu <xzy.xu@xxxxxxxxxxxxxx> wrote:
> Add power domain as a optional property for sdhci-of-arasan, which can
> be turned off in the so-called unused condition, such as suspend and
> remove. Aim to lower power requirements.
I assume runtime suspend make sense as well?
Moreover, perhaps you could share a little information here about what
needs to be done at the driver level which controls the mmc IP. More
precisely, what do you need to do at runtime_suspend, suspend,
runtime_resume, and resume?
Kind regards
Uffe
>
> Signed-off-by: Ziyuan Xu <xzy.xu@xxxxxxxxxxxxxx>
>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>
> Changes in v3:
> - fix a typo
> - add Rob's ack-tag
>
> Changes in v2:
> - fix a typo
> - add an example code for power-domain
>
> Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> index 3404afa..eb84d29 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> @@ -1,12 +1,14 @@
> Device Tree Bindings for the Arasan SDHCI Controller
>
> - The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings.
> + The bindings follow the mmc[1], clock[2], interrupt[3], phy[4] and power
> + domain[5] bindings.
> Only deviations are documented here.
>
> [1] Documentation/devicetree/bindings/mmc/mmc.txt
> [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
> [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> [4] Documentation/devicetree/bindings/phy/phy-bindings.txt
> + [5] Documentation/devicetree/bindings/power/power_domain.txt
>
> Required Properties:
> - compatible: Compatibility string. One of:
> @@ -36,6 +38,8 @@ Optional Properties:
> - #clock-cells: If specified this should be the value <0>. With this property
> in place we will export a clock representing the Card Clock. This clock
> is expected to be consumed by our PHY. You must also specify
> + - power-domains: A phandle and PM domain as specifier defined by bindings
> + of the power controller specified by phandle.
>
> Example:
> sdhci@e0100000 {
> @@ -71,5 +75,6 @@ Example:
> phys = <&emmc_phy>;
> phy-names = "phy_arasan";
> #clock-cells = <0>;
> + power-domains = <&power RK3399_PD_EMMC>;
> status = "disabled";
> };
> --
> 2.9.2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
