On Wed, Sep 14, 2016 at 07:09:41PM +0200, Wolfram Sang wrote: > From: Wolfram Sang <wsa@xxxxxxxxxxxxx> > > Here are the DTS changes to enable the on-board eMMC memory at 8 bit bus > widths on R-Car Gen3 Salvator-X boards. > > Note that 'non-removable' is not supported yet because of Runtime PM issues. It > seems we need to overhaul Runtime PM handling for other reasons as well, so I > suggest the basic support goes in like this and DTS do not use 'non-removable' > for now. > > Note also that I decided to use the pattern that pinctrl-0 is 3.3v and > pinctrl-1 is 1.8v, although the eMMC is fixed at 1.8v. I tried a few ways to > only use pinctrl-0 being 1.8v here, but they all ended up to be confusing for > users IMO, so I sticked to the most consistent solution after all. > > These patches are based on top of Simon's sdr104-v7 patches and the accompanied > driver patches sent a minute ago. A branch can be found here: Please ping me / repost once these patches are ready to be merged. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
