On 14 September 2016 at 13:21, Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote:
> It is wrong to use uninitialized dma_slave_config and configure only
> certain fields as the DMAengine driver might look at non initialized
> (random data) fields and tries to interpret it.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Thanks, applied for fixes!
Kind regards
Uffe
> ---
> Hi,
>
> Changes since v1:
> - do the field initialization in one step
>
> would it be possible to send this patch for 4.8? I have omap-dma DMAengine
> driver changes pending, but they break the MMC/SD because of the uninitialized
> fields in dma_slave_config.
>
> Thanks,
> Peter
>
> drivers/mmc/host/omap.c | 18 ++++++++++--------
> 1 file changed, 10 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> index f23d65eb070d..be3c49fa7382 100644
> --- a/drivers/mmc/host/omap.c
> +++ b/drivers/mmc/host/omap.c
> @@ -1016,14 +1016,16 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
>
> /* Only reconfigure if we have a different burst size */
> if (*bp != burst) {
> - struct dma_slave_config cfg;
> -
> - cfg.src_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
> - cfg.dst_addr = host->phys_base + OMAP_MMC_REG(host, DATA);
> - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
> - cfg.src_maxburst = burst;
> - cfg.dst_maxburst = burst;
> + struct dma_slave_config cfg = {
> + .src_addr = host->phys_base +
> + OMAP_MMC_REG(host, DATA),
> + .dst_addr = host->phys_base +
> + OMAP_MMC_REG(host, DATA),
> + .src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .src_maxburst = burst,
> + .dst_maxburst = burst,
> + };
>
> if (dmaengine_slave_config(c, &cfg))
> goto use_pio;
> --
> 2.10.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
