Hello.
On 09/09/2016 06:52 PM, Chris Brandt wrote:
For the r7s72100 SOC, the DATA_PORT register was change to be 32-bits wide.
Therefore a new flag has been created that will allow 32-bit reads/writes
to the DATA_PORT register instead of 16-bit (because 16-bits accesses are
not supported).
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
[...]
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 017a4dc..c38542d 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -439,10 +439,45 @@ static void tmio_mmc_transfer_data(struct tmio_mmc_host *host,
{
int is_read = host->data->flags & MMC_DATA_READ;
u8 *buf8;
+ u32 data;
/*
* Transfer the data
*/
+ if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) {
+ if (is_read)
+ sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
+ count >> 2);
+ else
+ sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
+ count >> 2);
+
+ /* if count was multiple of 4 */
+ if (!(count & 0x3))
+ return;
+
+ buf8 = (u8 *)(buf + (count >> 2));
+ count %= 4;
+
+ if (is_read) {
+ sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, &data, 1);
+ while (count--) {
+ *buf8 = data * 0xFF;
'data & 0xFF', perhaps?
+ data = data >> 8;
+ buf8++;
+ }
+ } else {
+ data = *buf8++;
+ if (count > 1)
+ data |= (*buf8++ << 8);
+ if (count > 2)
+ data |= (*buf8++ << 16);
+ sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, &data, 1);
+ }
+
+ return;
+ }
+
if (is_read)
sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1);
else
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
