On 09/08/2016 11:02 AM, Adrian Hunter wrote:
On 01/09/16 17:23, Pramod Gurav wrote:
Provides runtime PM callbacks to enable and disable clock resources
when idle. Also support system PM callbacks to be called during system
suspend and resume.
Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxx>
Can we get some Tested/Reviewed/Acked-by from people using this driver?
Hi Pramod,
Thanks for the patch. Unfortunately, my db410c board fails to
boot when i apply it.
[ 1.778433] mmc0: new HS200 MMC card at address 0001
[ 1.783115] mmcblk0: mmc0:0001 DS2008 7.28 GiB
[ 1.783337] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
[ 1.787025] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
[ 1.792893] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
[ 1.802603] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.693631] blk_update_request: I/O error, dev mmcblk0, sector 462880
[ 2.710381] blk_update_request: I/O error, dev mmcblk0, sector 462880
[ 2.710443] Buffer I/O error on dev mmcblk0p10, logical block 0,
async page read
[ 2.724827] blk_update_request: I/O error, dev mmcblk0, sector 462881
[ 2.724853] Buffer I/O error on dev mmcblk0p10, logical block 1,
async page read
...
More I/O errors are following and it is unable to mount the rootfs from
the eMMC. When i retried booting, got also the following:
[ 2.877149] mmcblk0: error -110 sending status command, retrying
[ 2.879408] mmcblk0: error -110 sending status command, retrying
[ 2.884436] mmcblk0: error -110 sending status command, aborting
[ 2.896826] mmc0: cache flush error -110
BR,
Georgi
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
