On 22/08/16 12:07, Ritesh Harjani wrote:
> Hi Adrian,
>
>
> On 8/22/2016 11:50 AM, Adrian Hunter wrote:
>> On 19/08/16 16:31, Ritesh Harjani wrote:
>>> Hi,
>>>
>>>
>>> On 8/19/2016 6:34 PM, Adrian Hunter wrote:
>>>> On 19/08/16 07:36, Ritesh Harjani wrote:
>>>>> sdhci-msm controller may have different clk-rates for each
>>>>> bus speed mode. Thus implement set_clock callback for
>>>>> sdhci-msm driver.
>>>>>
>>>>> Signed-off-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
>>>>> Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>
>>>>> ---
>>>>> drivers/mmc/host/sdhci-msm.c | 103
>>>>> ++++++++++++++++++++++++++++++++++++++++++-
>>>>> 1 file changed, 102 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
>>>>> index 7c032c3..c0ad9c2 100644
>>>>> --- a/drivers/mmc/host/sdhci-msm.c
>>>>> +++ b/drivers/mmc/host/sdhci-msm.c
>>>>> @@ -89,6 +89,7 @@ struct sdhci_msm_host {
>>>>> struct mmc_host *mmc;
>>>>> bool use_14lpp_dll_reset;
>>>>> struct sdhci_msm_pltfm_data *pdata;
>>>>> + u32 clk_rate;
>>>>> };
>>>>>
>>>>> /* Platform specific tuning */
>>>>> @@ -582,6 +583,106 @@ static unsigned int sdhci_msm_get_min_clock(struct
>>>>> sdhci_host *host)
>>>>> return msm_host->pdata->clk_table[0];
>>>>> }
>>>>>
>>>>> +static unsigned int sdhci_msm_get_msm_clk_rate(struct sdhci_host *host,
>>>>> + u32 req_clk)
>>>>> +{
>>>>> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>>>> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>>>>> + int count = msm_host->pdata->clk_table_sz;
>>>>> + unsigned int sel_clk = -1;
>>>>> + int cnt;
>>>>> +
>>>>> + if (req_clk < sdhci_msm_get_min_clock(host)) {
>>>>> + sel_clk = sdhci_msm_get_min_clock(host);
>>>>> + return sel_clk;
>>>>> + }
>>>>> +
>>>>> + for (cnt = 0; cnt < count; cnt++) {
>>>>> + if (msm_host->pdata->clk_table[cnt] > req_clk) {
>>>>> + break;
>>>>> + } else if (msm_host->pdata->clk_table[cnt] == req_clk) {
>>>>> + sel_clk = msm_host->pdata->clk_table[cnt];
>>>>> + break;
>>>>> + } else {
>>>>> + sel_clk = msm_host->pdata->clk_table[cnt];
>>>>> + }
>>>>> + }
>>>>
>>>> 'else' is not needed after 'break' but can't this be simpler e.g.
>>>>
>>>> static unsigned int sdhci_msm_get_msm_clk_rate(struct sdhci_msm_host
>>>> *msm_host, u32 req_clk)
>>>> {
>>>> int count = msm_host->pdata->clk_table_sz;
>>>> unsigned int sel_clk = -1;
>>>>
>>>> while (count--) {
>>>> sel_clk = msm_host->pdata->clk_table[count];
>>>> if (req_clk >= sel_clk)
>>>> return sel_clk;
>>>> }
>>>>
>>>> return sel_clk;
>>>> }
>>>
>>> Ok, sure I will check and get back on this.
>>>
>>>
>>>>
>>>>
>>>>> + return sel_clk;
>>>>> +}
>>>>
>>>> Blank line needed
>>> Ok done.
>>>
>>>>
>>>>> +/**
>>>>> + * __sdhci_msm_set_clock - sdhci_msm clock control.
>>>>> + *
>>>>> + * Description:
>>>>> + * Implement MSM version of sdhci_set_clock.
>>>>> + * This is required since MSM controller does not
>>>>> + * use internal divider and instead directly control
>>>>> + * the GCC clock as per HW recommendation.
>>>>> + **/
>>>>> +void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
>>>>> +{
>>>>> + u16 clk;
>>>>> + unsigned long timeout;
>>>>> +
>>>>> + host->mmc->actual_clock = 0;
>>>>> +
>>>>> + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
>>>>> +
>>>>> + if (clock == 0)
>>>>> + return;
>>>>
>>>> Should set host->mmc->actual_clock to the actual rate somewhere.
>>> Since MSM controller does not uses divider then there is no need of having
>>> actual clock since it should be same as host->clock.
>>
>> Ok, so sdhci_msm_get_msm_clk_rate() is not the actual clock rate?
> So I was assuming we need host->mmc->actual_clock rate if host->clock is not
> the actual rate.
> Ok, so I will update actual_clock to host->clock itself.
>
> pls, let me know if any concerns.
I am confused. Isn't clk_get_rate(msm_host->clk) the actual clock rate?
>>
>>>
>>> That's why I had kept it 0 intentionally. But I will add a comment
>>> here then.
>>>
>>>>
>>>>> +
>>>>> + /*
>>>>> + * MSM controller do not use clock divider.
>>>>> + * Thus read SDHCI_CLOCK_CONTROL and only enable
>>>>> + * clock with no divider value programmed.
>>>>> + */
>>>>> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
>>>>> +
>>>>> + clk |= SDHCI_CLOCK_INT_EN;
>>>>> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>>>>> +
>>>>> + /* Wait max 20 ms */
>>>>> + timeout = 20;
>>>>> + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
>>>>> + & SDHCI_CLOCK_INT_STABLE)) {
>>>>> + if (timeout == 0) {
>>>>> + pr_err("%s: Internal clock never stabilised.\n",
>>>>> + mmc_hostname(host->mmc));
>>>>> + return;
>>>>> + }
>>>>> + timeout--;
>>>>> + mdelay(1);
>>>>> + }
>>>>> +
>>>>> + clk |= SDHCI_CLOCK_CARD_EN;
>>>>> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>>>>> +}
>>>>> +
>>>>> +static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int
>>>>> clock)
>>>>> +{
>>>>> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>>>> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>>>>> + u32 msm_clock = 0;
>>>>> + int rc = 0;
>>>>> +
>>>>> + if (!clock)
>>>>> + goto out;
>>>>> +
>>>>> + if (clock != msm_host->clk_rate) {
>>>>> + msm_clock = sdhci_msm_get_msm_clk_rate(host, clock);
>>>>> + rc = clk_set_rate(msm_host->clk, msm_clock);
>>>>> + if (rc) {
>>>>> + pr_err("%s: failed to set clock at rate %u, requested clock
>>>>> rate %u\n",
>>>>> + mmc_hostname(host->mmc), msm_clock, clock);
>>>>> + goto out;
>>>>> + }
>>>>> + msm_host->clk_rate = clock;
>>>>> + pr_debug("%s: setting clock at rate %lu\n",
>>>>> + mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
>>>>> + }
>>>>> +out:
>>>>> + __sdhci_msm_set_clock(host, clock);
>>>>> +}
>>>>> +
>>>>> static const struct of_device_id sdhci_msm_dt_match[] = {
>>>>> { .compatible = "qcom,sdhci-msm-v4" },
>>>>> {},
>>>>> @@ -592,7 +693,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
>>>>> static const struct sdhci_ops sdhci_msm_ops = {
>>>>> .platform_execute_tuning = sdhci_msm_execute_tuning,
>>>>> .reset = sdhci_reset,
>>>>> - .set_clock = sdhci_set_clock,
>>>>> + .set_clock = sdhci_msm_set_clock,
>>>>> .get_min_clock = sdhci_msm_get_min_clock,
>>>>> .get_max_clock = sdhci_msm_get_max_clock,
>>>>> .set_bus_width = sdhci_set_bus_width,
>>>>>
>>>>
>>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
