Now SDHCI supports commands during transfer, enable support for the core
API.
There are 3 small changes needed:
First, auto-CMD12 cannot be used with a cap_cmd_during_tfr request because
the host controller cannot expect the command line to be available.
Secondly, a cap_cmd_during_tfr request must not send a stop command, again
because the host controller cannot expect the command line to be available.
Thirdly, when a cap_cmd_during_tfr command completes, use
mmc_command_complete() to notify the upper layers that the command line is
now available for further commands.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index cd65d474afa2..d293533f5a39 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -888,7 +888,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
struct mmc_request *mrq)
{
- return !mrq->sbc && (host->flags & SDHCI_AUTO_CMD12);
+ return !mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
+ !mrq->cap_cmd_during_tfr;
}
static void sdhci_set_transfer_mode(struct sdhci_host *host,
@@ -1031,9 +1032,18 @@ static void sdhci_finish_data(struct sdhci_host *host)
sdhci_do_reset(host, SDHCI_RESET_DATA);
}
- /* Avoid triggering warning in sdhci_send_command() */
- host->cmd = NULL;
- sdhci_send_command(host, data->stop);
+ /*
+ * 'cap_cmd_during_tfr' request must not use the command line
+ * after mmc_command_done() has been called. It is upper layer's
+ * responsibility to send the stop command if required.
+ */
+ if (data->mrq->cap_cmd_during_tfr) {
+ sdhci_finish_mrq(host, data->mrq);
+ } else {
+ /* Avoid triggering warning in sdhci_send_command() */
+ host->cmd = NULL;
+ sdhci_send_command(host, data->stop);
+ }
} else {
sdhci_finish_mrq(host, data->mrq);
}
@@ -1165,6 +1175,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
}
}
+ if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd)
+ mmc_command_done(host->mmc, cmd->mrq);
+
/*
* The host can send and interrupt when the busy state has
* ended, allowing us to wait without wasting CPU cycles.
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
