From: Christopher Freeman <cfreeman@xxxxxxxxxx> wait_event_interruptible_timeout() will return early if the blocked process receives a signal, causing the driver to abort the tuning procedure and possibly leaving the controller in a bad state. Since the tuning command is expected to complete quickly (<50ms) and we've set a timeout, use wait_event_timeout() instead. Signed-off-by: Christopher Freeman <cfreeman@xxxxxxxxxx> Tested-by: Robert Foss <robert.foss@xxxxxxxxxxxxx> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxxxxx> --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0e3d7c0..9e80203 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1960,7 +1960,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) spin_unlock_irqrestore(&host->lock, flags); /* Wait for Buffer Read Ready interrupt */ - wait_event_interruptible_timeout(host->buf_ready_int, + wait_event_timeout(host->buf_ready_int, (host->tuning_done == 1), msecs_to_jiffies(50)); spin_lock_irqsave(&host->lock, flags); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
