On 14 July 2016 at 10:26, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote: > This patch adds description for no-sd, no-sdio, no-mmc. We expose > these to DT as some of the controllers are unable to deal with > special cmd type due to hw limitation. > > Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> Thanks, applied for next! Kind regards Uffe > > --- > > Changes in v2: > - amend the description of these properties and the commit msg > > Documentation/devicetree/bindings/mmc/mmc.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt > index ecc007a..22d1e1f 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc.txt > @@ -49,6 +49,9 @@ Optional properties: > - mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported > - dsr: Value the card's (optional) Driver Stage Register (DSR) should be > programmed with. Valid range: [0 .. 0xffff]. > +- no-sdio: controller is limited to send sdio cmd during initialization > +- no-sd: controller is limited to send sd cmd during initialization > +- no-mmc: controller is limited to send mmc cmd during initialization > > *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line > polarity properties, we have to fix the meaning of the "normal" and "inverted" > -- > 2.3.7 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
